Allicdata Part #: | ATT-0218-12-NNN-02-ND |
Manufacturer Part#: |
ATT-0218-12-NNN-02 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Cinch Connectivity Solutions Midwest Microwave |
Short Description: | ATTENUATOR 12 DB DC 12.4GHZ |
More Detail: | RF Attenuator 12dB ±0.5dB 0Hz ~ 12.4GHz 50 Ohms 2W... |
DataSheet: | ATT-0218-12-NNN-02 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Active |
Attenuation Value: | 12dB |
Frequency Range: | 0Hz ~ 12.4GHz |
Power (Watts): | 2W |
Impedance: | 50 Ohms |
Package / Case: | N-Type In-Line Module |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
An ATT-0218-12-NNN-02 attenuator is an electronic component designed to reduce the amplitude of an electronic signal. The working principle of such an attenuator is based on the fact that an attenuator has a certain resistance across each of its pins which creates a voltage division. This voltage division results in a reduction of the amplitude of the signal. The amount of reduction is proportional to the value of the resistance. The same is true for current division as well.
The application field of an ATT-0218-12-NNN-02 attenuator varies depending on the number of pins and the amount of resistance provided. Generally, this type of attenuator is used in applications where it is necessary to reduce the amplitude of an incoming signal such as audio, radio, and television signals. Specifically, they are often used in audio systems to adjust the volume of the audio signal to a comfortable level.
When an ATT-0218-12-NNN-02 attenuator is used in an audio system, it helps to maintain an optimal signal-to-noise ratio. This is very important since having a low signal-to-noise ratio will cause undesirable white noise in the sound output. An ATT-0218-12-NNN-02 attenuator also helps to prevent any audio distortion caused by input signal levels that are too high or too low.
Another application for an ATT-0218-12-NNN-02 attenuator is in radio frequency (RF) communication systems. This type of attenuator allows the sensitivity of the receiver to be adjusted such that the antenna can receive only the necessary signals more easily. Furthermore, an ATT-0218-12-NNN-02 attenuator can be used to reduce the potential interference of a strong signal from overwhelming a weak signal.
In addition to these applications, an ATT-0218-12-NNN-02 attenuator can also be used in a variety of other areas such as video signal attenuation, photography, and communication devices. The amount of reduction provided can be adjusted by changing the resistance value of the pins on the attenuator. Therefore, it’s possible to get the desired amount of reduction depending on the application.
To sum up, the ATT-0218-12-NNN-02 attenuator is an electronic device designed to reduce the amplitude of an electronic signal. It can be used in a variety of applications such as audio, radio, and video signal attenuation, photography, and communication systems. Furthermore, the amount of reduction provided can be adjusted by changing the resistance value of the pins on the attenuator.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...