Allicdata Part #: | ATT-0225-08-TNC-02-ND |
Manufacturer Part#: |
ATT-0225-08-TNC-02 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Cinch Connectivity Solutions Midwest Microwave |
Short Description: | ATTENUATOR 8 DB DC 18GHZ |
More Detail: | RF Attenuator 8dB ±0.5dB 0Hz ~ 18GHz 50 Ohms 2W TN... |
DataSheet: | ATT-0225-08-TNC-02 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Active |
Attenuation Value: | 8dB |
Frequency Range: | 0Hz ~ 18GHz |
Power (Watts): | 2W |
Impedance: | 50 Ohms |
Package / Case: | TNC In-Line Module |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators are a type of circuit that reduces the power of an electrical signal without significantly changing its shape. The ATT-0225-08-TNC-02 is an attenuator that achieves this reduction of power by fine tuning the application field and working principle.
Application Field
The ATT-0225-08-TNC-02 is primarily used in the telecommunications and other communication industries. It is designed to reduce the levels of RF signals so that they stay within the pre-defined safety guidelines stipulated by relevant authorities. It is also frequently used in satellite antennas, ensuring the maximum utilization of antenna power for the best communication results.
Working Principle
The ATT-0225-08-TNC-02 consists of an inner core made of conductive material at the centre, with an external shell made of dielectric. It has two ports, one input and one output. The core is designed to interact with the external stub, resulting in the desired power reduction. The power is varied at the core by varying the frequency of application. The electrical output is further reduced by the dielectric material, which serves to absorb and disperse the external electrical signals.
When the incoming signal is applied to the core, it will induce an electric field, which in turn interacts with the external stub. This field is responsible for the varying attenuation of the electrical output. The variance of the attenuation will depend on the length of the external stub, which can be precisely tuned for maximum precision.
The attenuation process follows the principles of basic waveguide theory. The dielectric material, in addition to absorbing and dissipating the electric field, also serves to maintain the resonance of the external stub. This means that the attenuation is frequency-dependent, so that this device can be specifically tuned to suit a particular frequency.
The attenuation range of the ATT-0225-08-TNC-02 is approximately -20dB to 40dB. This means that the device can be used to reduce the level of electrical signals by up to 40dB. This makes it an ideal solution for any application where a considerable reduction in signal strength is needed, such as in the telecommunications industry.
The ATT-0225-08-TNC-02 is a high-performance attenuator designed for the telecommunications industry, offering precision tuning and excellent attenuation ranging from -20dB to 40dB. Its use of a highly conductive core and external dielectric material makes it a great solution for any application that requires electrical signal reduction without altering the signal’s shape.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...