![ATT-0225-11-TNC-02 Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
Allicdata Part #: | ATT-0225-11-TNC-02-ND |
Manufacturer Part#: |
ATT-0225-11-TNC-02 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Cinch Connectivity Solutions Midwest Microwave |
Short Description: | ATTENUATOR 11 DB DC 18GHZ |
More Detail: | RF Attenuator 11dB ±0.5dB 0Hz ~ 18GHz 50 Ohms 2W T... |
DataSheet: | ![]() |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Active |
Attenuation Value: | 11dB |
Frequency Range: | 0Hz ~ 18GHz |
Power (Watts): | 2W |
Impedance: | 50 Ohms |
Package / Case: | TNC In-Line Module |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators are electrical devices that reduce the power of a signal without distorting its waveform. The ATT-0225-11-TNC-02 is a general purpose, 2-position RF/microwave coaxial attenuator designed to attenuate a signal while avoiding distortion between 2.2 and 2.5 GHz. As its applications are far-reaching, it is important to understand its field of use and working principle.
Applications
The ATT-0225-11-TNC-02 attenuators are used in numerous RF and microwave applications. These include test and measurement, microwave communication systems, wireless networks, broadband communication links, laboratory instrumentation, satellite communication systems, and wireless distributed antenna systems. The device is suitable for applications where high linearity is required and low insertion loss is desired.
An example application is a microwave radio link, in which the ATT-0225-11-TNC-02 attenuator can be effectively utilized as an equalizer. By properly adjusting the attenuation level, the system is able to compensate for a variety of transmission line losses, allowing for a more consistent signal output.
Working Principle
The ATT-0225-11-TNC-02 attenuator functions by using two matched PIN diode arrays in series that are placed between two operating points. Each PIN diode is oriented in the opposite direction of the other, creating a balanced circuit. A DC bias voltage is then applied to the two ends, causing the two PIN diodes to turn on. When the signal is introduced, the PIN diode array attenuates the signal by a specific amount, depending on the DC bias voltage.
The ATT-0225-11-TNC-02 attenuator also features a temperature compensation circuit that maintains the accuracy of the attenuation level over the device’s operating temperature range of -40°C to +85°C. This circuit makes variation in attenuation with temperature changes minimal, ensuring reliable operation of the device.
Conclusion
The ATT-0225-11-TNC-02 attenuator is a versatile, general purpose device that can be used in a variety of RF and microwave communications applications. Its two PIN diode arrays working in series allow for a precise attenuation level to be adjusted, while the temperature compensation circuit ensures reliable operation even in extreme conditions.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
![HMC939LP4E Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
![ATT-0225-60-TNC-02 Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
![M3933/17-09N Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
![E-TA3216 T 2DB N6 Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
![AT-206(40) Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
RF ATTENUATOR 7DB SMA MODULERF Attenuato...
![ATT-0276-07-SMA-02 Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)