ATT-0263-12-SMA-02

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Attenuators refer to special components that can control the electrical signal when pressure is applied. As a type of attenuator, ATT-0263-12-SMA-02 has its own application field and working principles. Generally, these attenuators are used to grid the input signal by a certain proportion and react to the frequency. In this way, attenuators can form a negative feedback system, whose frequency characteristics can also be adjusted.

The most common application for ATT-0263-12-SMA-02 is in telecommunications. It is used to prevent transmission lines or electronic systems from responding to the high frequency signals of the primary signal. By reducing the signal rate, the attenuator can reduce the peak current or increase the duty cycle of a signal and achieve the purpose of signal smoothing or signal modulation. For example, during broadband telecommunications, the primary signals are transmitted at a very high frequency. If the frequency is not controlled, the primary signal will move too fast beyond the response capability of the transmission line. ATT-0263-12-SMA-02 is widely used in this case to control the signal rate and thus enable the primary signal to be transmitted in a smooth way.

Another popular application of ATT-0263-12-SMA-02 is in instrumentation and communication products. It is commonly used to identify signals. Generally, ATT-0263-12-SMA-02 works in close contact with the router and other incoming equipment. It is used to receive and recognize the signals. Once the signals are recognized, the attenuator can adjust its frequency response characteristic accordingly. For instance, the signal may be identified too weakly or too strongly. Then the attenuator can reduce its frequency response accordingly.

ATT-0263-12-SMA-02 generally works by providing an impedance varying electrical path between the input and output pins. As the incoming signals come through the pins, they will be affected by the impedance of the resistor. If the signal is too strong, it will be weakened by the resistance. This way, the signal rate will be controlled and the desired frequency characteristics will be achieved.

Generally speaking, ATT-0263-12-SMA-02 is a type of passive attenuator which means the electrical signals can only be controlled and don’t create new energy. As the attenuator is widely used in electronic systems, its system design should also be taken into consideration. Different values of resistors in the attenuator can create different frequency response curves. The values of the resistors can thus be used to fine tune the frequency response according to the specific needs of the system.

The specific data is subject to PDF, and the above content is for reference