ATT-0263-70-SMA-02

Series:	--
Packaging:	Bulk
Part Status:	Active
Attenuation Value:	0dB ~ 60dB
Frequency Range:	0Hz ~ 18GHz
Power (Watts):	2W
Package / Case:	SMA In-Line Module

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

<h2>ATT-0263-70-SMA-02 Application Field and Working Principle</h2><p>ATT-0263-70-SMA-02 is a type of attenuator that is used to reduce the magnitude of a signal by a predetermined amount. It is used mainly in radio frequency (RF) applications. The working principle of this attenuator is based on resistive power dissipation.</p><p>An attenuator is an electronic device that is used to reduce the power of a signal without changing its waveform. It typically consists of a network of resistors that attenuate a signal according to a predetermined value. In most designs, one or more terminals of the resistive network are connected to the signal source, while the other terminals are grounded. This arrangement creates a voltage divider circuit. As the output of the voltage divider is reduced, so is the magnitude of the input signal.</p><p>The ATT-0263-70-SMA-02 is a type of attenuator that utilizes ferrite and thin-film resistors in its design. When used in RF applications, these resistors dissipate the power in the transmission line. The amount of attenuation is determined by the power dissipation capability of the resistors and the length of the transmission line between the attenuator and the signal source.</p><p>Attenuators are used in a variety of applications. Most commonly, attenuators are used to adjust the signal level in transmitters and receivers, to prevent transmitter overload, to limit the amount of interference between transmitters and receivers, and to reduce energy losses at the receiving end of a system. By adjusting the signal level, attenuators can reduce the amount of noise in a signal. In addition, attenuators can be used to adjust the impedance matching between a transmitter and a receiver.</p><p>The ATT-0263-70-SMA-02 attenuator is designed to reduce the power of a signal by a predetermined amount. The working principle of the attenuator is based on resistive power dissipation. The amount of attenuation is determined by the power dissipation capability of the resistors and the length of the transmission line. The ATT-0263-70-SMA-02 attenuator is used in a variety of applications, including adjustment of signal level in transmitters and receivers, prevention of transmitter overload, limiting interference between transmitters and receivers, and reducing energy losses at the receiving end of a system.</p>

The specific data is subject to PDF, and the above content is for reference