Allicdata Part #: | ATT-0277-11-SMA-02-ND |
Manufacturer Part#: |
ATT-0277-11-SMA-02 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Cinch Connectivity Solutions Midwest Microwave |
Short Description: | ATTENUATOR 11 DB DC 4GHZ |
More Detail: | RF Attenuator 11dB ±0.5dB 0Hz ~ 8GHz 2W SMA In-Li... |
DataSheet: | ATT-0277-11-SMA-02 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Active |
Attenuation Value: | 11dB |
Frequency Range: | 0Hz ~ 8GHz |
Power (Watts): | 2W |
Package / Case: | SMA In-Line Module |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators are electrical devices that are designed to reduce the intensity of a signal without distorting its waveform. The specific device ATT-0277-11-SMA-02 is an example of an RF attenuator, which is designed to reduce the power of a radio frequency signal. It can be used in many different applications.
One of the most common applications for the ATT-0277-11-SMA-02 is in the field of telecommunications. It can be used to reduce the power of an RF signal before it is transmitted across a communications network. This ensures that any interference caused by the signal is minimized, and that the signal can be reliably received at its destination.
The ATT-0277-11-SMA-02 can also be used in radio receivers and transmitters, such as those used in mobile phones or two-way radios. The device is designed to reduce the power of the transmitted signal, which helps to reduce the amount of interference and ensure that the signal is received clearly and without distortion.
In addition, the ATT-0277-11-SMA-02 can be used to reduce the noise of a signal. This is especially useful in applications where a signal needs to be amplified, but the amount of background noise is too high. By reducing the noise, the signal can be more easily amplified without introducing distortion or interference.
The ATT-0277-11-SMA-02 works by using a series of resistors to reduce the power of a signal. The device has two sections, an input and an output. When a signal is fed into the input, it passes through the resistors, which reduce the power of the signal. The signal then exits through the output, at a reduced level.
The amount of power reduction can be adjusted using a control knob on the device. The knob can be used to adjust the resistance of the resistors, which in turn affects the amount of power that is reduced. This allows the device to be used for a wide range of power-reduction needs.
The ATT-0277-11-SMA-02 is a versatile device that can be used in a variety of applications. In telecommunications, it can be used to reduce the power of a signal before it is transmitted, ensuring minimum interference. In receivers and transmitters, it can be used to reduce the noise of the signal, allowing for clear transmission. And in other applications, it can be used to adjust the power of a signal in order to reduce distortion or interference.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...