ATT-0290-03-HEX-02

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ATT-0290-03-HEX-02 is a high-quality attenuator. It is made up of three resistor elements and is designed to provide a high-dynamic range, low-distortion attenuation. This type of attenuator has very low insertion loss, which is specifically a maximum of 0.3dB at 200MHz. The great advantages of this attenuator over other attenuators are its high dynamic range, low insertion loss, and relatively low distortion levels.

The primary application field of the ATT-0290-03-HEX-02 is in telecommunications. It is used to provide a consistent decrease in signal levels (attenuation) between two or more communications signals. Examples of such applications include: cellular base station antennas, radio communication systems, and satellite communications. The attenuator can also be used in wireless LAN and microwave systems to reduce the signal transmission power.

The working principle of the ATT-0290-03-HEX-02 is based on resistive attenuation technique. The three resistor elements are arranged in a T-shape configuration on the attenuator board. When a voltage is applied on one side of the resistor elements, an attenuated voltage is obtained at the other end. As the resistors are of equal value, the attenuated voltage will have a uniform level along its length. The resistive attenuation technique is a superior way of attenuating the signal with minimal distortion and superior consistency.

The ATT-0290-03-HEX-02 is particularly suitable for applications where the system is required to perform reliably in the presence of noise or interference. The attenuator has a good linearity in the frequency response and is able to maintain its attenuation values as well as the spectral shape of the original signal within the frequency. Thus, the ATT-0290-03-HEX-02 attenuator can be used to achieve excellent signal-to-noise ratio performance.

The ATT-0290-03-HEX-02 has a VSWR (Voltage Standing Wave Ratio) of 1.00 to 1.10, which ensures accurate signal transmission without any reflections. The connector is easy to mount and can be secured to the attenuator board with either an RG58 or RG59 coaxial cable. The ATT-0290-03-HEX-02 attenuator is fully RoHS compliant with UL and FCC certification. It is suitable for use in commercial and residential applications.

The ATT-0290-03-HEX-02 is an exceptional attenuator that offers high performance and reliability in telecommunications applications. It is constructed with three resistor elements in a T-shaped configuration, which gives it superior linearity and attenuation values without distortion. It is easy to mount and provides low insertion loss while maintaining a consistent level of attenuation.

The specific data is subject to PDF, and the above content is for reference