Allicdata Part #: | ATT-0290-70-HEX-02-ND |
Manufacturer Part#: |
ATT-0290-70-HEX-02 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Cinch Connectivity Solutions Midwest Microwave |
Short Description: | ATTENUATOR 0.5 DB DC 18GHZ |
More Detail: | RF Attenuator 0dB ~ 60dB ±1dB 0Hz ~ 18GHz 2W HEX ... |
DataSheet: | ATT-0290-70-HEX-02 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Active |
Attenuation Value: | 0dB ~ 60dB |
Frequency Range: | 0Hz ~ 18GHz |
Power (Watts): | 2W |
Package / Case: | HEX In-Line Module |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators are electrical devices that reduce the amplitude of a signal without introducing any distortion or disturbing the original signal waveform. The ATT-0290-70-HEX-02 attenuator is a specific type of attenuator that is used in many applications. This article will discuss the application field and working principle of the ATT-0290-70-HEX-02 attenuator.
The ATT-0290-70-HEX-02 attenuator is a surface-mount device that is primarily used to reduce a signal\'s power or amplitude. The device has a flat gain response between 470MHz and 5GHz and provides an attenuation up to 70dB. It is designed specifically to reduce the amplitude of higher frequencies, and is commonly used in applications where precise control of the signal\'s power is necessary, such as cellular radio and other wireless communication systems.
The device is constructed with a printed circuit board (PCB) that contains multiple RF ports. Each port is connected to the ground plane through a via, and the signal is fed to the via through an RF connector. The signal is then routed through the circuit and passed between the various ports as it is attenuated to the desired level. This type of attenuator is advantageous because it can reduce the signal quickly and accurately with minimal distortion. It has been designed specifically to handle high frequencies, and is therefore ideal for use in cellular and other wireless communication systems.
The working principle of the ATT-0290-70-HEX-02 attenuator is based on the concept of a voltage divider. The signal that is input into the device is divided into two separate halves. The signal is routed through the various ports of the PCB, and the impedance of each port acts as a resistor, reducing the amplitude of the signal as it passes through. Depending on the number and arrangement of the ports, the amount of attenuation can be adjusted to provide the desired effect.
The ATT-0290-70-HEX-02 attenuator is an efficient and reliable way to reduce the power or amplitude of a signal without introducing any distortion. It is capable of handling high frequencies, making it ideal for cellular and other wireless communication systems. Furthermore, the device is easily adjustable to provide the desired level of attenuation.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...