Allicdata Part #: | ATT-0292-04-HEX-02-ND |
Manufacturer Part#: |
ATT-0292-04-HEX-02 |
Price: | $ 67.64 |
Product Category: | RF/IF and RFID |
Manufacturer: | Cinch Connectivity Solutions Midwest Microwave |
Short Description: | ATTENUATOR 4 DB DC 8GHZ |
More Detail: | RF Attenuator 4dB 0Hz ~ 8GHz 2W HEX In-Line Modu... |
DataSheet: | ATT-0292-04-HEX-02 Datasheet/PDF |
Quantity: | 1000 |
5 +: | $ 61.49680 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Active |
Attenuation Value: | 4dB |
Frequency Range: | 0Hz ~ 8GHz |
Power (Watts): | 2W |
Package / Case: | HEX In-Line Module |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
.Application Field and Working Principle of ATM-0292-04-HEX-02 Attenuator
ATM-0292-04-HEX-02 is a device used to reduce the power of a signal naturally before transmission. Attenuators, also known as pad attenuators or voltage attenuators, are widely used in audio and communication applications where a reduction in signal amplitude is desired.
Uses of ATM-0292-04-HEX-02 Attenuator
ATM-0292-04-HEX-02 attenuator is commonly used in a variety of applications, including:
- Radar systems, where they are used to adjust signal levels of transmitting and receiving antennas.
- Test and measurement, where they are used to ensure that a signal does not overdrive a device under test.
- In radio link systems, where they are used to prevent interference or overloads in the components of the link.
- The attenuator is also used in electronic circuits, where it is used to reduce and match the signal levels of the different components in the system.
Features of ATM-0292-04-HEX-02 Attenuator
ATM-0292-04-HEX-02 attenuator is a high-performance device with excellent features including:
- High frequency range up to 18 GHz
- Low return loss up to 20 dB
- High power rating up to 10W
- Small size
- Weatherproof housing
Working Principle of ATM-0292-04-HEX-02 Attenuator
ATM-0292-04-HEX-02 attenuator is a passive device, which is used to reduce the power of an RF signal without affecting its waveform. It is mainly composed of resistors or specialized networks of resistors, capacitors and inductors and is designed to reduce the power of the signal across each of these components. The attenuation of the signal is determined by the ratio of the resistance through which the signal is passed and the total resistance.
When an RF signal is applied to an attenuator, the total power of the signal is reduced, and the voltage of the signal is decreased, while the signal shape and frequency remain unchanged. This is advantageous in applications where the signal should not be distorted, yet its power must be reduced. The attenuation of the signal is determined by the amount of resistance through which the signal is passed (the load).
Conclusion
ATM-0292-04-HEX-02 attenuator is a high-performance device offering excellent features in a small package. It is commonly used in a variety of applications to reduce the power of an RF signal without affecting its waveform. ATM-0292-04-HEX-02 attenuator is also designed to reduce the power by passing the signal through a load of resistors, capacitors and inductors, where the attenuation of the signal is determined by the ratio of the resistance through which the signal is passed and the total resistance.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...