ATT-0292-07-SMA-02 Allicdata Electronics
Allicdata Part #:

ATT-0292-07-SMA-02-ND

Manufacturer Part#:

ATT-0292-07-SMA-02

Price: $ 46.97
Product Category:

RF/IF and RFID

Manufacturer: Cinch Connectivity Solutions Midwest Microwave
Short Description: ATTENUATOR 7 DB DC 8GHZ
More Detail: RF Attenuator 7dB 0Hz ~ 8GHz 2W SMA In-Line Modu...
DataSheet: ATT-0292-07-SMA-02 datasheetATT-0292-07-SMA-02 Datasheet/PDF
Quantity: 1000
5 +: $ 42.70140
Stock 1000Can Ship Immediately
$ 46.97
Specifications
Series: --
Packaging: Bulk 
Part Status: Active
Attenuation Value: 7dB
Frequency Range: 0Hz ~ 8GHz
Power (Watts): 2W
Package / Case: SMA In-Line Module
Description

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Attenuators

ATT-0292-07-SMA-02 is a type of attenuator. An attenuator is a device that reduces the power of a signal without distorting the signal waveform. This article will discuss the application field and working principle of the ATT-0292-07-SMA-02 attenuator.

Application

ATT-0292-07-SMA-02 attenuators are primarily used in radiofrequency (RF) circuits, run at frequencies up to 7.5GHz. They are used to control transmission power levels, allowing users to adjust power levels and equalise signal levels. RF attenuators are also used in testing and calibration of RF circuits and systems.

Working Principle

ATT-0292-07-SMA-02 attenuators use two substrates and a combination of resistors and capacitors to reduce the strength of a signal. The two substrates are usually ceramic, and the resistors and capacitors are the same as those used in other types of circuits. This type of attenuator is known as a ladder attenuator, and it is the most commonly used type of RF attenuator.

The first substrate contains the resistors, which absorb the power of the signal. These resistors are connected in series, with each successive resistor absorbing a little more power as the signal passes through. The second substrate contains the capacitors, which act as a buffer between the first substrate and the signal. The capacitors absorb any excess power and dissipate it as heat. The combination of the two substrates and the resistors and capacitors allows the attenuator to reduce the power of the signal while keeping the waveform intact.

Conclusion

ATT-0292-07-SMA-02 attenuators are widely used in RF circuits and systems. They are used to reduce the power of RF signals while maintaining the waveform intact. They consist of two substrates and a combination of resistors and capacitors that absorb power and dissipate it as heat. This type of attenuator is known as a ladder attenuator, and is the most commonly used type of RF attenuator.

The specific data is subject to PDF, and the above content is for reference

Latest Products
HMC939LP4E

RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...

HMC939LP4E Allicdata Electronics
ATT-0225-60-TNC-02

RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...

ATT-0225-60-TNC-02 Allicdata Electronics
M3933/17-09N

RF ATTENUATOR 1DB SMA MODULERF Attenuato...

M3933/17-09N Allicdata Electronics
E-TA3216 T 2DB N6

RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...

E-TA3216 T 2DB N6 Allicdata Electronics
AT-206(40)

RF ATTENUATOR 6DB 50OHM SMARF Attenuator...

AT-206(40) Allicdata Electronics
ATT-0276-07-SMA-02

RF ATTENUATOR 7DB SMA MODULERF Attenuato...

ATT-0276-07-SMA-02 Allicdata Electronics