Allicdata Part #: | ATT-0298-19-HEX-02-ND |
Manufacturer Part#: |
ATT-0298-19-HEX-02 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Cinch Connectivity Solutions Midwest Microwave |
Short Description: | ATTENUATOR M DB DC 26.5GHZ |
More Detail: | RF Attenuator 19dB ±0.5dB 0Hz ~ 26.5GHz 2W HEX In... |
DataSheet: | ATT-0298-19-HEX-02 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Active |
Attenuation Value: | 19dB |
Frequency Range: | 0Hz ~ 26.5GHz |
Power (Watts): | 2W |
Package / Case: | HEX In-Line Module |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators are devices used to reduce the level of a signal without distorting its waveform. The ATT-0298-19-HEX-02 attenuator is an adjustable RF attenuator with a wide frequency range, allowing for precise control of signal level. It is widely used in applications such as attenuating high power signal sources, controlling the level of receiver input signals, and matching two signal sources.
The ATT-0298-19-HEX-02 is a 19-pin Hex attenuator with a frequency range of DC to 18GHz. The input and output connectors are both three wide with SMA-K type female connectors. The device has a maximum attenuation of 30dB, with an insertion loss of typically below 0.5dB and a return loss of better than 20dB. The device also has an accuracy rating of better than 0.5dB and a VSWR of less than 1.2:1.
The ATT-0298-19-HEX-02 uses a unique combination of resistors to achieve its wide range of attenuation. The device consists of six linear resistor sections, each with a different resistance range. Each resistor section can be adjusted independently to achieve the desired attenuation. This allows for precise control of the signal level over the “footprint” of the attenuator.
The ATT-0298-19-HEX-02 has a number of useful applications in the field of RF communication. In transmitters, the attenuator can be used to reduce the level of the output signal so that it is within the safe operating range of the receiver. This prevents overload and ensures that the signal quality remains consistent. In receivers, the attenuator can be used to reduce the level of an incoming signal so that it is within the linear range of the receiver. This prevents distortion and ensures that the receiver can accurately decode the signal.
The ATT-0298-19-HEX-02 attenuator is a versatile and cost-effective solution for signal level control. Its accuracy and wide frequency range make it suitable for a variety of applications, from reducing the level of high-power signal sources, to matching two signal sources, and controlling the level of receiver input signals. By using the adjustable resistor sections, the user can achieve precise control of signal levels over the “footprint” of the attenuator. The ATT-0298-19-HEX-02 is an ideal choice for RF engineers and designers looking to reduce the level of signal levels without distortion.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...