Allicdata Part #: | ATT-0298-19-SMA-02-ND |
Manufacturer Part#: |
ATT-0298-19-SMA-02 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Cinch Connectivity Solutions Midwest Microwave |
Short Description: | ATTENUATOR 19 DB DC 26.5GHZ |
More Detail: | RF Attenuator 19dB ±0.5dB 0Hz ~ 26.5GHz 2W SMA In... |
DataSheet: | ATT-0298-19-SMA-02 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Active |
Attenuation Value: | 19dB |
Frequency Range: | 0Hz ~ 26.5GHz |
Power (Watts): | 2W |
Package / Case: | SMA In-Line Module |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators are devices used to reduce the amplitude of an incoming signal. The most common applications of attenuators are in radio-frequency (RF) systems for reducing the power of a transmit signal to the level required by the receiver. They are also used in industries, such as the telecommunications, aerospace, and defense industries, to reduce signal levels that may otherwise interfere with other devices. ATT-0298-19-SMA-02 is a type of attenuator that is extensively used in these industries due to its superior performance.
The ATT-0298-19-SMA-02 is a two-stage attenuator with an adjustable attenuation range of 30dB. It is a 3GHz bandwidth device with SMA female connectors. In a typical application, the input of the ATT-0298-19-SMA-02 is connected to the signal source, and the output is connected to the load. The device then reduces the signal amplitude as specified by the attenuation range selection.
The ATT-0298-19-SMA-02 attenuator works on a simple principle. When an incoming signal is applied, a resistive element, or attenuator, is connected in series with the signal. The amount of signal attenuation is determined by the resistance value of the attenuator and the amount of current flowing through it.
The ATT-0298-19-SMA-02 is an ideal choice for industries such as telecommunications, aerospace, and defense due to its wide attenuation range and high-bandwidth performance. It enables the users to attenuate the signal from 10 to 40dB, based on their requirements. Adjusting the attenuation from 10dB to 40dB is easy, and users can use the integrated control knob to optimize the signal level. Additionally, the ATT-0298-19-SMA-02 is compatible with a wide range of devices, including antenna systems, filters, amplifiers, and antennas.
In summary, ATT-0298-19-SMA-02 is a two-stage attenuator with an adjustable attenuation range of 30dB and a 3GHz bandwidth. It is an effective solution for reducing signal levels in industries such as telecommunications, aerospace and defense, due to its wide attenuation range and high-bandwidth performance. Its easy-to-operate control knob allows users to adjust the attenuation from 10 to 40 dB, depending on their requirements. Moreover, the ATT-0298-19-SMA-02 is compatible with a wide range of devices.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...