ATT-0333-00-SMA-02

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Attenuators

Attenuators are electronic components that reduce the power or amplitude of a signal without distorting its waveform. They are typically passive devices constructed from resistors, capacitors, inductors, or a combination thereof, and are used to provide impedance matching between different circuitry or devices, to reduce the level of a signal, or to callibrate an amplifier\'s gain. Common applications include antenna tuning, video and audio signal processing, and various power management and distribution tasks.

ATT-0333-00-SMA-02

The ATT-0333-00-SMA-02 is a high-precision RF attenuator made by Quantum Components. It is a 9-bit, surface-mount attenuator used for signal attenuation in cellular base stations, wireless communication systems, and various RF-signal-processing tasks.

Application Field and Working Principle

The ATT-0333-00-SMA-02 is designed for applications requiring extremely precise signal attenuation in the range of 0dB to just below -90dB. Each attenuator bit is programmable from 0dB to 5dB in 1dB steps, allowing for precision attenuation tuning over the full 90dB range. The 9-bit precision allows for maximum signal fidelity as well as excellent impedance matching between different components in the same system.

The ATT-0333-00-SMA-02 is a resistive attenuator and works by using a resistive network of resistors to reduce the amplitude of a signal. The resultant attenuation is determined by the ratio of the resistor network, and changes in this ratio can be programmed in 1dB increments to provide precise attenuation tuning for different applications. The device is designed to accurately control the signal level while preserving the frequency spectrum and phase response of the signal with minimal distortion.

The ATT-0333-00-SMA-02 is housed in a surface-mount package and is rated for operating temperatures from -40°C to +125°C. It is designed to operate with a supply voltage of +3.3V and has an insertion loss of a maximum of 0.5dB. It is also designed with a high-impedance input and low-impedance outputs, which makes it ideal for use in sensitive, high-frequency signal-processing tasks.

The ATT-0333-00-SMA-02 provides a convenient and cost-effective way to precisely control the level of a signal. Its high-precision resolution, wide dynamic range, and wide operating temperature range make it suitable for a wide variety of applications, from base station to wireless communication systems.

The specific data is subject to PDF, and the above content is for reference