Allicdata Part #: | ATT-0444-03-HEX-02-ND |
Manufacturer Part#: |
ATT-0444-03-HEX-02 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Cinch Connectivity Solutions Midwest Microwave |
Short Description: | ATTENUATOR 3 DB DC 18GHZ |
More Detail: | RF Attenuator 3dB ±0.75dB 0Hz ~ 18GHz HEX In-Lin... |
DataSheet: | ATT-0444-03-HEX-02 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Active |
Attenuation Value: | 3dB |
Frequency Range: | 0Hz ~ 18GHz |
Power (Watts): | -- |
Package / Case: | HEX In-Line Module |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
ATT-0444-03-HEX-02 is an attenuator, a device used to reduce the amplitude of a signal. It is a hexadecimal attenuator designed to operate in a wide range of frequencies from 0.2 to 6GHz. It also offers excellent linearity, temperature stability, and low-power consumption.
Attenuators are used in various electronic applications, such as RF communications, audio processing, and data compression. In radio frequency (RF) applications, attenuators can be used to reduce interference between transmitters and receivers, to help improve signal-to-noise ratio, to reduce fluctuations in RF signal strength, or to avoid saturation of circuits. Similarly, in audio processing, attenuators can be used to adjust the amplitude of an audio signal, thereby avoiding overloading of subsequent stages. In data compression, attenuators are used to adjust the signal levels before encoding and decoding.The ATT-0444-03-HEX-02 attenuator consists of four fixed resistor networks bonded together on a hybrid organic board. Each network is composed of sixteen chips, arranged in a hexagonal pattern. The resistance of each chip can be varied, resulting in an adjustable attenuation. The resistor networks are connected in a four-stage configuration, with the input connected to the first and smoothed with a large gate resistor. The output of each stage is connected to the next, providing variable attenuation through the stages. The total attenuation of the circuit can be varied from 20dB to greater than 40dB.
The working principle of the ATT-0444-03-HEX-02 attenuator is relatively simple. The input signal is received by the first resistor network, and through the action of the gate resistor, is shaped into a smooth waveform before being attenuated. The signal then passes through the other resistor networks, each attenuating the signal further. The total attenuation of the circuit is controlled by adjusting the resistance of the chips in each resistor network. As the resistance is adjusted, the total attenuation of the circuit is modified accordingly.
In summary, the ATT-0444-03-HEX-02 is an excellent choice for applications that require adjustable RF attenuation. It offers excellent linearity, low-power consumption, and temperature stability. It is composed of four fixed resistor networks bonded on a hybrid organic board, and the resistance of each chip can be adjusted, providing variable attenuation from 20dB to greater than 40dB. It is a reliable and versatile solution for multiple RF applications.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...