Allicdata Part #: | ATT-0444-04-HEX-02-ND |
Manufacturer Part#: |
ATT-0444-04-HEX-02 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Cinch Connectivity Solutions Midwest Microwave |
Short Description: | ATTENUATOR 4 DB DC 18GHZ |
More Detail: | RF Attenuator 4dB ±0.75dB 0Hz ~ 18GHz HEX In-Lin... |
DataSheet: | ATT-0444-04-HEX-02 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Active |
Attenuation Value: | 4dB |
Frequency Range: | 0Hz ~ 18GHz |
Power (Watts): | -- |
Package / Case: | HEX In-Line Module |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators are devices used to reduce the amplitude of an electronic signal. They are primarily used in radio communication applications to reduce the level of a signal without distorting its waveform. The ATT-0444-04-HEX-02 is a type of attenuator that has been designed for RF (radio frequency) applications in fields such as communication systems and military electronics. In this article we look at the application field of the ATT-0444-04-HEX-02 attenuator and its working principle.
Application Fields
The ATT-0444-04-HEX-02 is a surface mount attenuator designed for operation in the 0 to 4GHz frequency range. It is designed for use in systems such as military radios, cell phone networks, remote control systems, and other communication systems. The device is RoHS compliant and shielded for better performance. It is designed for use in tight areas where other components may be in close proximity or obstruct the signal.
The ATT-0444-04-HEX-02 is a high power, high frequency surface mount attenuator with a maximum attenuation of 15dB. It features low temperature coefficient and high power handling capability. The device has an impedance of 50 ohms, which allows it to be used in a variety of systems. It is also designed to be used in high temperature applications, and it has a wide operating temperature range of -65°C to +150°C.
Working Principle of the ATT-0444-04-HEX-02
The ATT-0444-04-HEX-02 works by reducing the strength of an input signal and is commonly referred to as a power divider or signal splitter. The device splits the signal into two parts, one of which is attenuated and the other is passed on with no change. This is done by using two resistors in parallel which are connected to the input and output. The resistance of the resistors depends on the level of attenuation that is desired. The signal is then split into the output as a weaker signal.
The ATT-0444-04-HEX-02 also features an internal bandpass filter, which allows for the device to reject signals outside its frequency range. This helps to eliminate interference from other devices and reduce unwanted noise. The device also features an over voltage protection which helps to protect it from damage caused by input voltages that are too high.
The ATT-0444-04-HEX-02 is a useful device for applications where power levels must be reduced while keeping the waveform intact. The device can be used in RF systems to reduce the signal level while filtering out unwanted noise and interference. The device is designed for easy installation and is shielded for better performance. It is RoHS compliant and is suitable for use in a wide variety of systems.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...