Allicdata Part #: | ATT-0444-18-SMA-02-ND |
Manufacturer Part#: |
ATT-0444-18-SMA-02 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Cinch Connectivity Solutions Midwest Microwave |
Short Description: | ATTENUATOR 18 DB DC 18GHZ |
More Detail: | RF Attenuator 18dB ±1.5dB 0Hz ~ 18GHz SMA In-Lin... |
DataSheet: | ATT-0444-18-SMA-02 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Active |
Attenuation Value: | 18dB |
Frequency Range: | 0Hz ~ 18GHz |
Power (Watts): | -- |
Package / Case: | SMA In-Line Module |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators are circuit elements designed to reduce the amplitude of a signal without severely distorting its shape or frequency content. A key feature of most attenuators is their ability to dissipate power, or convert electrical energy into another form, primarily heat. This is a desirable quality when controlling the power of a signal. The ATT-0444-18-SMA-02 is a type of attenuator that is used in many industries.
The ATT-0444-18-SMA-02 attenuator is a passive device that is designed to reduce the amplitude of a radio frequency signal. The attenuator is an 18 dB, 50 ohm, frequency-agile device that operates from 2 to 8 GHz. The power rating of the ATT-0444-18-SMA-02 is 1 watt, and the insertion loss is typically less than 0.4 dB over the frequency range.
The ATT-0444-18-SMA-02 attenuator has a wide variety of applications. It can be used to reduce or monitor power levels in RF systems such as base stations, PA systems, antennas, transmitters, receivers and other RF systems. It can be used in the laboratory or field to ensure compliance with regulatory standards or product specifications. It can also be used to adjust the signal level for optimum performance or power management, or to reduce power levels in order to protect components and/or extend the life of sensitive equipment.
The working principle of the ATT-0444-18-SMA-02 attenuator is simple. An electromagnetic field is induced on the input of the attenuator, and this energy is dissipated in the form of heat, thus reducing the amplitude of the signal. The attenuator works by splitting the signal into two signal paths, one that is at the input impedance of the attenuator and the other that is at the output impedance. The signal that passes through the input impedance is attenuated while the other signal is not affected. This allows for the signal to be reduced without significantly affecting the frequency content or shape of the signal.
The ATT-0444-18-SMA-02 attenuator is a useful tool for controlling the power of a signal in many different applications. It can be used to protect sensitive equipment, adjust signal levels for optimal performance or power management, and ensure compliance with regulatory standards or product specifications. Thanks to its frequency-agile design and low insertion loss, the ATT-0444-18-SMA-02 attenuator is a reliable and cost-effective solution for any attenuation needs.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...