![ATT-0444-19-SMA-02 Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
Allicdata Part #: | ATT-0444-19-SMA-02-ND |
Manufacturer Part#: |
ATT-0444-19-SMA-02 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Cinch Connectivity Solutions Midwest Microwave |
Short Description: | ATTENUATOR 19 DB DC 18GHZ |
More Detail: | RF Attenuator 19dB ±1.5dB 0Hz ~ 18GHz SMA In-Lin... |
DataSheet: | ![]() |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Active |
Attenuation Value: | 19dB |
Frequency Range: | 0Hz ~ 18GHz |
Power (Watts): | -- |
Package / Case: | SMA In-Line Module |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators
The ATT-0444-19-SMA-02 is a type of attenuator, which is a device used to reduce the level of a signal without significantly affecting the quality of the wave. These types of attenuators are commonly used in electronics and telecommunications engineering. These attenuators are used to reduce the amplitude of a signal without significantly distorting the wave form or introducing too much extra noise.
Application Field
ATT-0444-19-SMA-02 attenuators are most commonly used in telecommunications engineering, where they are used to reduce the power of a signal so that it is not too strong at its destination. They are also used in engineering environments to make sure that the maximum power level is not exceeded, as well as to create more uniform signals. In addition, they are useful in creating the right amount of attenuation for measurements or tests, such as in impedance testing.
Working Principle
In order to understand the working principle of attenuators, it is important to first understand the concept of impedance. Impedance is the total opposition of a circuit to a signal, and it is measured in ohms. Since the ATT-0444-19-SMA-02 attenuator is a two port device, it has an input port and an output port. The input port has two terminals, one of which is connected to ground and the other of which is connected to the signal source. The output port has two terminals, one of which is connected to the signal that is to be attenuated and the other of which is connected to ground.
The attenuator works by using the difference in impedance between the two ports to reduce the level of the signal. When the signal is applied to the input port, it is divided into two equal parts. One part is sent to the output port while the other part is directed to ground. As the signal passes through the attenuator, the impedance between the two ports is altered, resulting in a reduction in the signal level at the output port.
In addition to reducing the level of the signal, the ATT-0444-19-SMA-02 attenuator can also be used to prevent damage to equipment. Since the attenuation factor of the device can be adjusted, it can be used to adjust the signal level so that it is not too high for the receiving device. This can help to protect the integrity of the receiving device as well as keep it from malfunctioning.
Conclusion
The ATT-0444-19-SMA-02 is a type of attenuator that is primarily used in telecommunications engineering. It works by using the difference in impedance between the two ports to reduce the level of the signal. In addition to reducing the level of the signal, the attenuator can also be used to prevent damage to the receiving devices by adjusting the signal level so that it is not too high. It is an important device that is used in many applications, and will continue to be used in the future.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
![HMC939LP4E Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
![ATT-0225-60-TNC-02 Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
![M3933/17-09N Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
![E-TA3216 T 2DB N6 Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
![AT-206(40) Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
RF ATTENUATOR 7DB SMA MODULERF Attenuato...
![ATT-0276-07-SMA-02 Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)