Allicdata Part #: | ATT-0523-02-SMA-02-ND |
Manufacturer Part#: |
ATT-0523-02-SMA-02 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Cinch Connectivity Solutions Midwest Microwave |
Short Description: | ATTENUATOR 2 DB DC 18GHZ |
More Detail: | RF Attenuator 2dB ±0.3dB 0Hz ~ 18GHz SMA In-Line... |
DataSheet: | ATT-0523-02-SMA-02 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Active |
Attenuation Value: | 2dB |
Frequency Range: | 0Hz ~ 18GHz |
Power (Watts): | -- |
Package / Case: | SMA In-Line Module |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators play an important role in RF and microwave engineering. Attenuators are used to reduce the strength of a signal as it travels through a cable or other medium, with the purpose of preventing overload and preserving signal integrity. The ATT-0523-02-SMA-02 is an example of an attenuator, and is highly effective in its applications. In this article, we will explore the application field and working principle of the ATT-0523-02-SMA-02 attenuator.
The ATT-0523-02-SMA-02 attenuator is a directivity-controlled product, designed specifically for maximum efficiency over a wide range of frequencies. It is ideally suited for use in radio frequency (RF) power applications, such as amplifiers, transmitters, receivers, and oscillators. It is also often employed in applications involving amplifiers, filters, and antennas.
The attenuator is a passive device, meaning that it does not require any external power supply. Instead, it relies on the energy provided by the signal itself. This makes it a cost-effective and energy-efficient solution for many applications. In addition, the use of an RF choke maximizes signal rejection, providing greater protection against signal overloads.
The ATT-0523-02-SMA-02 attenuator is an effective solution for reducing signal power levels. It is designed to reduce the amplitude of an RF signal while preserving its frequency content. This is achieved through the use of a series of resistors connected in parallel. Each resistor absorbs a portion of the signal’s energy, allowing it to pass through with a reduced amplitude. The amount of energy absorbed by each resistor is determined by its value.
The ATT-0523-02-SMA-02 attenuator is also designed to deliver excellent performance in terms of linearity and accuracy. This means that it produces an accurate and reliable signal. This is especially important in applications where low-level signals must be accurately measured, such as in radio astronomy.
In terms of durability, the ATT-0523-02-SMA-02 attenuator is highly resistant to physical and environmental wear-and-tear. This means that it is capable of operating in hostile environments. Its robust design also ensures reliable performance over a long period of time.
The ATT-0523-02-SMA-02 attenuator is also highly cost-effective. Compared to other attenuators, it offers greater performance for a lower price. This makes it an attractive option for applications where high performance is required, but cost is an important consideration.
In summary, the ATT-0523-02-SMA-02 attenuator is an effective solution for reducing signal power levels. Its directivity-controlled design, along with its resistance to physical and environmental wear-and-tear make it a reliable and cost-effective solution for many applications. Its linearity and accuracy also make it an attractive option for applications where accuracy is a critical requirement.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...