Allicdata Part #: | ATT-0523-06-SMA-02-ND |
Manufacturer Part#: |
ATT-0523-06-SMA-02 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Cinch Connectivity Solutions Midwest Microwave |
Short Description: | ATTENUATOR 6 DB DC 18GHZ |
More Detail: | RF Attenuator 6dB ±0.3dB 0Hz ~ 18GHz SMA In-Line... |
DataSheet: | ATT-0523-06-SMA-02 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Specifications
Series: | -- |
Packaging: | Bulk |
Part Status: | Active |
Attenuation Value: | 6dB |
Frequency Range: | 0Hz ~ 18GHz |
Power (Watts): | -- |
Package / Case: | SMA In-Line Module |
Description
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Introduction to Attenuators
Attenuators are electrical or electronic components that reduce the amplitude of a signal while allowing the signal to pass through. They are most commonly used in telecommunications, audio amplifiers, and other electronic equipment. Attenuators can be active or passive, depending on the type of attenuation being applied. Active attenuators make adjustments to the signals via a feedback circuit, while passive attenuators generally rely on resistors to reduce the amplitude. Regardless of the type, attenuators are important components for precision control over electrical signals.ATT-0523-06-SMA-02
The ATT-0523-06-SMA-02 is a type of attenuator commonly used in telecommunications and audio amplifier applications. It is a fixed attenuator that is designed to reduce the amplitude of radio signals and audio signals. It is passive, meaning it does not rely on any active components or internal circuitry to attenuate the signal.The ATT-0523-06-SMA-02 consists of two resistive elements which are connected in-line with the signal path. The amount of attenuation provided by the components is determined by the size of the resistive elements, which are adjusted to achieve the desired amount of reduction in signal amplitude. For example, a device with two 20 ohm resistors connected in-line would provide approximately 10 dB of attenuation.Applications
The ATT-0523-06-SMA-02 is mainly used in telecommunications and audio amplifier applications, where precise control over the signal amplitude is required. The attenuation provided by the device can be used to reduce signal interference caused by external sources or to limit the signal’s range to a specific area. Additionally, the ATT-0523-06-SMA-02 is an ideal solution for balancing audio signals between different devices, as it allows for fine-grained control over the signal amplitude.Advantages
The ATT-0523-06-SMA-02 has several advantages over other types of attenuators:- The device is small and compact, making it easy to install in tight locations.
- It is a low-cost solution for controlling signal amplitude.
- The attenuation provided by the device can be easily adjusted by changing the size of the resistive elements.
- It is a passive device, meaning it does not require any external power or complex circuitry.
Conclusion
The ATT-0523-06-SMA-02 is a type of attenuator used in telecommunications and audio amplifiers. It is a passive device that consists of two resistive elements which are adjusted to provide the desired amount of attenuation. The advantages of the ATT-0523-06-SMA-02 include its small size, low cost, easy installation, and the ability to adjust the attenuation with simple adjustments to the resistive elements.The specific data is subject to PDF, and the above content is for reference
Latest Products
HMC939LP4E
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
ATT-0225-60-TNC-02
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
M3933/17-09N
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
E-TA3216 T 2DB N6
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
AT-206(40)
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
ATT-0276-07-SMA-02
RF ATTENUATOR 7DB SMA MODULERF Attenuato...