Allicdata Part #: | ATT-290M-00-HEX-02-ND |
Manufacturer Part#: |
ATT-290M-00-HEX-02 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Cinch Connectivity Solutions Midwest Microwave |
Short Description: | ATTENUATOR 0 DB DC 18GHZ |
More Detail: | RF Attenuator 0Hz ~ 18GHz 2W HEX In-Line Module |
DataSheet: | ATT-290M-00-HEX-02 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Active |
Attenuation Value: | -- |
Frequency Range: | 0Hz ~ 18GHz |
Power (Watts): | 2W |
Package / Case: | HEX In-Line Module |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators are components of electronic circuits used to reduce the amplitude of a signal without changing its waveform. The ATT-290M-00-HEX-02 is a digital integrated attenuator designed for use in microwave and RF applications. This type of attenuator offers fast switching times, low insertion loss, and high accuracy over a range of signal levels.
The ATT-290M-00-HEX-02 is a digital integrated attenuator with a wide range of applications. This type of attenuator can be used in a variety of applications including radio frequency (RF) amplifiers, linear phase-shift systems, frequency synthesizers, transceiver systems, and wireless networks. In addition, this integrated attenuator can be used in radio-frequency interference (RFI) reduction and protection circuits, as well as in test equipment for the calibration of microwave systems.
The ATT-290M-00-HEX-02 digital integrated attenuator operates in the frequency range of 50 to 18GHz and is available in two models dependent on the signature resistance value. The nominal values are either 60 ohms or 150 ohms. This attenuator has a low insertion loss of 0.2 dB typical and 0.3 dB maximum. It also offers high accuracy of 0.1 dB typical and 0.2 dB maximum.
The ATT-290M-00-HEX-02 works on a number of different principles. The most common forms of attenuation are located in a passive decibel or loss-based attenuator. This type of attenuator works by reducing the magnitude of the input signal and is commonly used to reduce high-frequency output levels from amplifiers or other circuits. Another form of attenuation is active attenuation. This type of attenuator includes active circuitry that can provide high or low input impedances depending on the requirements of the circuit.
This type of attenuator is also found in digital attenuators, which work by using digital switches and logic circuitry to reduce the signal level. This type of attenuator can be used to control the level of a signal and can provide varying levels of signal attenuation. In addition to these basic forms of attenuation, there are other types of attenuation including in-line loss, microstrip, voltage controlled, and hybrid attenuators.
The ATT-290M-00-HEX-02 digital integrated attenuator is ideal for a variety of applications including RF amplifiers, linear phase-shift systems, frequency synthesizers, data links, and wireless networks. It is an efficient, cost-effective solution for controlling the level of high-frequency signals for maximum performance and accuracy. The ATT-290M-00-HEX-02 is suitable for applications requiring high accuracy and fast switching times in the 50 to 18GHz frequency range.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...