AU-14.7456MBE-T Crystals, Oscillators, Resonators |
|
Allicdata Part #: | 887-1641-2-ND |
Manufacturer Part#: |
AU-14.7456MBE-T |
Price: | $ 1.27 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | TXC Corporation |
Short Description: | OSC XO 14.7456MHZ CMOS SMD |
More Detail: | 14.7456MHz XO (Standard) CMOS Oscillator 3.3V Enab... |
DataSheet: | AU-14.7456MBE-T Datasheet/PDF |
Quantity: | 1000 |
3000 +: | $ 1.14818 |
Frequency Stability: | ±50ppm |
Current - Supply (Disable) (Max): | -- |
Height - Seated (Max): | 0.043" (1.10mm) |
Size / Dimension: | 0.126" L x 0.098" W (3.20mm x 2.50mm) |
Package / Case: | 4-SMD, No Lead |
Mounting Type: | Surface Mount |
Ratings: | AEC-Q100 |
Current - Supply (Max): | 6mA |
Operating Temperature: | -40°C ~ 85°C |
Series: | AU |
Voltage - Supply: | 3.3V |
Output: | CMOS |
Function: | Enable/Disable |
Frequency: | 14.7456MHz |
Type: | XO (Standard) |
Base Resonator: | Crystal |
Part Status: | Active |
Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
An oscillator is a device which generates and produces an oscillatory waveform at a required frequency. Oscillators are classified into LC oscillators, crystal oscillators, Colpitts oscillators, Pierce oscillators, and Wien bridge oscillators, etc. AU-14.7456MBe-T is an oscillator belonging to the Wien bridge oscillator category whose application field lies in AC power measurement and control, and whose working principle is based on Wien bridge.
The structure of AU-14.7456MBe-T consists mainly of an amplifier, a capacitor, and a resistance, which form an electrical bridge. The amplifier provides a stable gain and a variable output scale. The resistor provides a feedback signal, and the capacitor provides a load, through which the oscillator generates a periodic waveform signal.
The AU-14.7456MBe-T oscillator works in such a way that an input is supplied to the amplifier, which produces an output according to the input. The output is then sent to the capacitor, which acts as the load for the oscillator. The capacitor contains two capacitors which are connected in series, and act as the feedback signal for the amplifier. The resulting voltage is then sent to the resistance, which acts as the collector for the oscillator and produces the oscillatory waveform at the desired frequency.
The AU-14.7456MBe-T is suitable for AC power measurement and control applications, in particular in high-voltage and current environments. This means that it can be used to measure and control the AC power in electronic circuits and systems. Additionally, thanks to its Wien bridge configuration, the AU-14.7456MBe-T has high stability and precision, making it suitable for these applications.
In order to function properly, the AU-14.7456MBe-T oscillator needs to be supplied with a specific supply voltage, which must be determined according to the type of measurement or control. Additionally, the oscillator requires a properly designed wiring circuit to ensure accurate tracking of the oscillations generated by the oscillator.
In conclusion, the AU-14.7456MBe-T is a Wien bridge oscillator that is suitable for high-voltage and current applications, and provides stable and precise AC power measurement and control. It requires a specific power supply and a properly designed circuit in order to function properly.
The specific data is subject to PDF, and the above content is for reference
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...