AX7DAF1-429.4967T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are an important part of any electronic system, and one common type is the AX7DAF1-429.4967T. Understanding the application field and working principle is the key to their successful deployment in a system.

Working Principle

The AX7DAF1-429.4967T is a low phase noise VCO (voltage-controlled oscillator), and it works based on a classic linear LC (inductor-capacitor) tank circuit. This resonance is formed of an inductor and two capacitors, with the zener diode used to create a voltage reference. When power is applied, the LC tank starts to oscillate, creating a sinusoidal waveform that has a frequency that is determined by the values of the components used in the resonator circuit.

The voltage control is provided by a voltage-controlled amplifier that is connected to the resonator. The voltage applied to the amplifier controls the output frequency of the oscillator, and the zener diode provides a voltage reference, which ensures the frequency range stays within a programmed spec. With the VCO typically operating as both an amplifier and a oscillator, the signal can be adjusted around the desired operating frequency to reduce phase noise.

Applications

The primary application for the AX7DAF1-429.4967T is as an RF (radio frequency) signal source in a variety of communication systems. It can be used for both carrier and modulation signals in systems such as GSM (Global System for Mobile Communications) and LTE (Long Term Evolution). It also has applications in microwave systems, particularly those used for radar or satellite communications.

The AX7DAF1-429.4967T is also used as clock signal sources for microcontrollers and digital logic circuits, as well as frequency synthesizers. Its low phase noise performance makes it especially suitable for applications where accuracy and reliability are important, such as communication systems, military electronic systems, or medical systems.

Conclusion

The AX7DAF1-429.4967T is a low phase noise VCO with a wide range of applications. Its working principle is based on a resonator circuit of an inductor and two capacitors, with a voltage controlled amplifier used to control the output frequency. It is mostly used for RF signal sources in communication systems as well as clock signal sources for microcontrollers and frequency synthesizers in a variety of applications.

The specific data is subject to PDF, and the above content is for reference