AX7DAF1-575.0000T

Absolute Pull Range (APR):	--
Current - Supply (Disable) (Max):	65mA
Height - Seated (Max):	0.075" (1.90mm)
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Package / Case:	8-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	70mA
Operating Temperature:	-40°C ~ 85°C
Series:	Clearclock™ AX7
Frequency Stability:	±25ppm
Voltage - Supply:	3.3V
Output:	LVDS
Function:	Enable/Disable
Frequency:	575MHz
Type:	XO (Standard)
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators have been used in a variety of applications for many years. The AX7DAF1-575.0000T oscillator is a type of electronic component used for the generation of electrical signals for various purposes, including systems involving digital or analog frequency control. This oscillator has a range of different features and can be used for a wide range of applications. This article will discuss the application field and working principle of the AX7DAF1-575.0000T oscillator.The AX7DAF1-575.0000T oscillator is an analog type of oscillator, and is used in a number of different applications. It can be used as an oscillator for timing applications such as clock generators, frequency synthesizers, and signal generators. It can also be used for power supply filtering for power amplifiers, and for audio applications such as signal processing.The AX7DAF1-575.0000T oscillator is also used in control systems, including automotive applications. It can be used for varying signals such as the use of engine speed to control fuel delivery, or the use of wheel speed to control steering. This oscillator is also used for certain radio communications applications, such as for the automatic selection of frequencies in certain devices. In addition, this oscillator is also used for haptic feedback systems, such as in computer gaming systems.The AX7DAF1-575.0000T oscillator works by producing a sinusoidal signal. The signal is generated when the oscillator is turned on, and then continues to oscillate until it is turned off. This oscillator works by using an inductor and a capacitor, which are connected in series. The inductor will store the energy, and the capacitor will discharge the energy into the load, which is the device or circuit that the oscillator is powering.The frequency of the signal produced by the AX7DAF1-575.0000T oscillator is dependent on the value of the capacitor and the inductor. The higher the value of the capacitor, the higher the frequency of the signal. The higher the value of the inductor, the lower the frequency of the signal. The frequency range of this oscillator is typically from 0.5 Hz up to 4 KHz.The AX7DAF1-575.0000T oscillator is a good choice for applications where it is necessary to generate a frequency that is relatively stable over the course of operation. This oscillator also offers good performance in terms of its accuracy and reproducibility of the frequency. This oscillator can be used for both digital and analog frequency control, and it is also suitable for applications where low power consumption is required.In conclusion, the AX7DAF1-575.0000T oscillator is a type of electronic component used for the generation of signals for various purposes. This oscillator produces a sinusoidal signal by using an inductor and capacitor. It has a wide range of applications, including timing, signal processing, automotive control, and haptic feedback. It is also suitable for applications where low power consumption is needed, and for applications requiring a reliable and accurate frequency.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description