AX7DAF2-100.0000C

Oscillators are an important component in electronic systems. They are used to create signals with given physical characteristics, and are found in many electrical and communication systems. AX7DAF2-100.0000C is an oscillator that is used to generate an sine wave signal of frequency 100MHZ.

The AX7DAF2-100.0000C comprises a quartz crystal cut in a particular way, and mounted between two electrodes. The electrodes can be made of aluminum or steel, and are usually joined together by electrical soldering. The quartz crystal is cut in such a way that when voltage is applied to the electrodes, it will vibrate at a certain frequency, depending on the type of quartz and its thickness. In this case, the thickness and shape of the crystal determines the frequency that will be produced by the oscillator.

This oscillator can be used in many different application fields, where the output of a precise frequency is required. It can be used for communications, frequency-dependent filtering, frequency modulation, pulse position modulation, and other processes. It is often used in radio transmitters and receivers, as it is able to generate radio frequency signals with a very low phase noise. It is also used in noise suppression, circuit timing, and signal conditioning, where the accurate timing signals are required.

The working principle of AX7DAF2-100.0000C is quite simple. When an external current or voltage is applied to the electrodes, it causes a piezoelectric effect in the quartz crystal. This effect causes the crystal to vibrate at the same frequency, generating an electrical signal of the same frequency. This signal is then amplified and filtered to obtain the desired frequency.

It is important to note that the AX7DAF2-100.0000C is a precision component, and it is sensitive to temperature variations. As a result, it needs to be carefully calibrated to ensure accuracy and consistency of the output signal. The calibration should be checked periodically to make sure that all the components are working properly.

The AX7DAF2-100.0000C oscillator is an important component in many electronic systems and applications. It is designed to generate an accurate sine wave signal of frequency 100MHZ and is suitable for use in radio transmitters and receivers, noise suppression, circuit timing, and other processes. In addition, the precision of the device and its sensitivity to temperature need to be taken into consideration when it is being used.