AX7DAF2-100.0000T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Oscillators

An oscillator is an electrical circuit capable of producing a repetitive signal (oscillations). Oscillators are used in many electronic devices, such as clocks, radio transmitters, receivers, and laboratory instruments, to generate a signal with a certain frequency and wave shape. In most practical applications, the frequency of the signal generated by an oscillator must be accurately maintained.

Different Types of Oscillators

Oscillators can be classified into two main categories: analog and digital. Analog oscillators use components, such as resistors, capacitors, and inductors, to generate an output signal, while digital oscillators rely on integrated circuits (ICs) to accomplish the same task. There are a variety of different types of oscillators, including linear oscillators, nonlinear oscillators, and frequency synthesizers.

Application & Working Principle of AX7DAF2-100.0000T

The AX7DAF2-100.0000T is an analog oscillator designed for use in a wide variety of commercial and industrial applications. It is a very stable device that is capable of producing a signal with a frequency of 100 kHz. The device can be used in applications such as motor control, frequency modulation, frequency synthesis, phase locked loop (PLL), and data acquisition.

The working principle of the AX7DAF2-100.0000T oscillator is based on the concept of feedback. The device consists of an amplifier, a timing capacitor, and a timing resistor. The amplifier amplifies the input signal, and the timing capacitor and resistor control the signal’s frequency and wave shape. When a positive voltage is applied to the input of the amplifier, the amplifier output increases. This increase in the amplifier output causes the voltage on the timing capacitor to increase, which in turn increases the time required for the capacitor to discharge. This increase in the discharge time results in a decrease in the frequency of the output signal. Conversely, when a negative voltage is applied to the input of the amplifier, the output voltage decreases, and the discharge time of the timing capacitor increases, resulting in an increase in the frequency of the output signal.

Conclusion

The AX7DAF2-100.0000T is an analog oscillator designed for a wide range of commercial and industrial applications. It is a very stable device capable of producing a signal with a frequency of 100 kHz. The device works on the principle of feedback, and consists of an amplifier, a timing capacitor, and a timing resistor. The voltage applied to the input of the amplifier determines the frequency of the output signal.

The specific data is subject to PDF, and the above content is for reference