AX7DAF2-780.0000C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are electronic circuits used to produce periodic voltage signals in an established frequency range. They support a wide range of operations, including frequency synthesis, clock recovery, data conversion, and modulation, making them essential components in a variety of consumer and industry applications. One such oscillator is the AX7DAF2-780.0000C, a low-cost differential oscillator which is widely used in a variety of communication systems. In this article, we\'ll discuss the application field and working principle of the AX7DAF2-780.0000C.

The AX7DAF2-780.0000C is a differential oscillator with a low operating voltage. It is optimized for multi-GHz applications, with a bandwidth of up to 7.8 GHz, a PLL bandwidth of 500 KHz, and a power consumption of only 0.5 mW. This oscillator is suitable for high-frequency communication systems, such as wireless telecommunications, microwaves, and cellular systems. Its frequency can be adjusted over a range of 3.6 to 7.8 GHz, making it suitable for a wide range of applications. Additionally, its low-power operation makes it ideal for battery-powered applications.

The working principle of the AX7DAF2-780.0000C is based on the differential transmission line, which is composed of two transmission lines with opposite polarity signals. It is driven by a differential signal at the input, which is then converted to an unipolar signal at the output. The basic components of the AX7DAF2-780.0000C are the two differential pins (V DD and V SS ), the three capacitors (C1, C2 and C3), the two resistors (R1 and R2), and the two transistors (Q1 and Q2). The system is designed to produce a signal that is 90-degrees out of phase with the input signal.

The differential transmission line works by generating two differential signals with opposite signs. The differential signals are then converted to an unipolar signal at the output through the action of the capacitors and resistors. The capacitors C1 and C2 act as miller capacitors, which convert the differential signals to an unipolar signal. The resistor R1 is used to limit the gain of the system, while R2 is used to adjust the frequency of the system. The final element is the two transistors, which are used to modulate the amplitude of the output signal.

To summarize, the AX7DAF2-780.0000C is a low-cost differential oscillator which is widely used in high-frequency communication systems. It has a wide bandwidth of up to 7.8 GHz and consumes low power, making it suitable for battery-powered applications. Its working principle is based on the differential transmission line, which uses three capacitors, two resistors, and two transistors to convert a differential signal to an unipolar signal at the output.

The specific data is subject to PDF, and the above content is for reference