AX7DBF1-1966.0800C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are electronic circuits — usually including inductors, capacitors and active components such as transistors or op-amps — that are configured to produce an output signal, in the form of an alternating current, that is roughly constant in frequency and amplitude over time. This output signal is typically fed back to the input of the circuit to keep the process repeating. Oscillators are one of the most important types of circuits for controlling the frequency of a signal, and for generating test signals. One of the most commonly used oscillators is the AX7DBF1-1966.0800C. This article examines the application field and working principle of the AX7DBF1-1966.0800C.

What is the AX7DBF1-1966.0800C?

The AX7DBF1-1966.0800C is an oscillator circuit from Alpha Electronics, capable of producing an alternating voltage. This oscillator consists of a tuned LC circuit, with a pair of transistor amplifiers, a capacitive divider, and other components. It is stable, accurate, and can be used in a wide range of applications.

Applications of the AX7DBF1-1966.0800C

The AX7DBF1-1966.0800C is commonly used in applications requiring high stability, accuracy, low power consumption, and low cost. These include audio systems, communications systems, radio transmitters and receivers, medical equipment, and automotive systems. It is also suitable for generating pulse signals and clock signals for embedded systems, and is commonly used in industrial control applications.

Working Principle of the AX7DBF1-1966.0800C

The primary component of the AX7DBF1-1966.0800C circuit is the tuned LC circuit, which consists of an inductor and a capacitor. When the circuit is connected to a power source, the capacitor starts to charge, building up a voltage across it. As the capacitor charges, the inductor\'s magnetic field increases, forming a feedback loop that increases the voltage. At the same time, the current flow generates a magnetic field in the inductor, which induces a counter-voltage, allowing the capacitor to gradually discharge. This cycle of charging and discharging creates an oscillating voltage, which is fed through the transistor amplifiers to create an alternating voltage waveform.

To maintain a stable frequency, a controlling voltage is applied to the oscillating circuit. This voltage is typically supplied by a voltage regulator, which adjusts the supply voltage to ensure that the desired frequency is maintained. In some cases, a voltage-controlled oscillator is used, in which the voltage applied to the oscillator is adjusted according to the requirements of the system.

Conclusion

The AX7DBF1-1966.0800C is a versatile oscillator circuit, capable of producing an accurate, stable alternating voltage waveform. It is commonly used for a range of applications, including audio systems, communications systems, and embedded systems. It works by using a tuned LC circuit, combined with transistor amplifiers, to generate an oscillating voltage waveform, which is then regulated by a controlling voltage.

The specific data is subject to PDF, and the above content is for reference