AX7DBF1-74.2500T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

An oscillator, simply put, is an electronic circuit that creates a periodic, oscillating electronic signal, often a sine wave or a square wave. It is a key component of many electronic platforms, and is critical to a variety of applications that include wireless communications systems, computer networking systems, power control systems, digital switching systems, analog signal processors and embedded systems.

Specifically, the AX7DBF1-74.2500T is a voltage-controlled oscillator (VCO) designed for frequency-modulated (FM) applications. VCOs are used in a variety of applications, including frequency synthesis, data recovery systems, time base generation and modulation.

The AX7DBF1-74.2500T utilizes a voltage control technique in which the oscillator frequency is determined by a constant current fed into an external varactor diode. The capacitance of the diode varies according to an applied control voltage and this, in turn, varies the frequency of the oscillator. The control voltage is usually generated by an external source and applied to the oscillator’s RF output port. Also, the oscillator is capable of reaching output frequencies as high as 3000MHz and phase noise levels as low as -50dBc/Hz.

In frequency synthesis systems, VCOs are used to generate a diverse range of frequencies, stable in time, that allow communication systems to rapidly scan the spectrum for signals. They are vital to applications such as receivers and transmitters, audio and video, wireless communications and remote control systems, and are used to impart a system frequency that can be modulated in response to an externally applied voltage.

VCOs are also employed in data recovery applications, such as in the demodulation of binary data encoded in FM signals. In this case, the oscillator’s output frequency is compared to an externally applied reference frequency, and the difference is detected and processed to extract the encoded data signals. Additionally, VCOs are often utilized in time base generation for analog to digital converters, radar systems, and in modem systems.

The AX7DBF1-74.2500T also has applications as a transmitter modulator, where the input signal is modulated at the VCO frequency, which is then amplified and radiated to a receiver. In this method, the frequency of the VCO is varied in response to the signal input, and the result is a frequency modulated (FM) signal.

Finally, VCOs are essential for analog signal processors such as signal mixers, multipliers and correlators. Here, two signals are applied to the oscillator’s input port and combined, and then phase-modulate by the oscillator’s output frequency. VCOs are also used in electronic filters, where an input signal is mixed with an output feedback signal, and the frequency difference will determine the filter’s characteristics.

In summary, the AX7DBF1-74.2500T is a VCO designed for FM applications and is used in a variety of applications such as frequency synthesis, data recovery systems, time base generation and modulation. Moreover, its output frequency can reach up to 3000MHz and reach phase noise levels of less than -50dBc/Hz. With its wide range of applications, the AX7DBF1-74.2500T provides a reliable and extremely accurate solution to a variety of RF applications.

The specific data is subject to PDF, and the above content is for reference