AX7DBF2-1050.0000C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are an essential part of any electronic device or system. They accomplish a range of tasks, from providing a radio frequency signal source for wireless communication, to controlling the pulse rate of a microprocessor, to providing the basic timing for communication systems. The AX7DBF2-1050.0000C oscillator is one of the most popular oscillator designs available today and is used in many different applications.

The AX7DBF2-1050.0000C is a crystal oscillator that works by providing a quartz crystal resonator with an oscillating electrical signal. The crystal resonator vibrates as an electrical current oscillates around it. This vibration is then used to produce a precise electrical signal at a set frequency. It is important to note that the frequency of the oscillator is determined by the size of the crystal resonator, which for the AX7DBF2-1050.0000C oscillator is 10.000MHz.

The AX7DBF2-1050.0000C oscillator is a commonly used device for telecom and datacom applications. Its frequency stability, low jitter, and small size make it an ideal choice for these applications. It is also used in digital systems, such as cell phones and PDA\'s, where small, precise timing pulses are needed to control the processor. Its high frequency stability also makes it ideal for test and measurement applications where regular and precise monitoring of frequency output is necessary.

The AX7DBF2-1050.0000C oscillator has two main components – the quartz crystal resonator and the oscillator circuit. The quartz crystal resonator is the heart of the oscillator and serves as the frequency determining device. It produces a precise frequency based on the size of the crystal resonator. The oscillator circuit provides the oscillating electrical signal that is used to create the vibration in the quartz crystal resonator. This oscillation then produces the electrical signal that is used to create a frequency.

The AX7DBF2-1050.0000C oscillator has two operating modes – open-loop and closed-loop. In open-loop operation, the frequency is generated directly from the quartz crystal resonator, without any external feedback. In closed-loop operation, the oscillator circuit uses a feedback loop to control the frequency of the oscillator. This allows for better stability and accuracy than open-loop operation, but has the disadvantage of requiring more power.

Another important characteristic of the AX7DBF2-1050.0000C oscillator is its low phase noise. This refers to the level of noise present in the signal at any given frequency. Lower phase noise is desirable, as it reduces interference and allows for stronger signal transmission. The AX7DBF2-1050.0000C oscillator has a phase noise of only -100 dBc/Hz at 10 kHz offset, which is among the best in its class.

The AX7DBF2-1050.0000C oscillator is a versatile device that can be used in many different applications. Its stable frequency and high phase noise make it ideal for telecom and datacom purposes, while its small size makes it perfect for portable devices. Its easy-to-use operating modes also make it suitable for many different test and measurement applications. The AX7DBF2-1050.0000C oscillator is a reliable and cost-effective device that is sure to serve your needs.

The specific data is subject to PDF, and the above content is for reference