AX7DBF3-150.0000C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are circuits that generate repeating periodic signals at a steady frequency. A type of oscillator, the AX7DBF3-150.0000C oscillator, is based on a series resonance circuit, which is composed of an inductor and a capacitor. Two common applications of the AX7DBF3-150.0000C oscillator are frequency control in radio receiver and transmitter circuits and time-base control in oscilloscope circuits.

Under normal conditions the AX7DBF3-150.0000C oscillator operates at a frequency of 150 kHz. The frequency can be tuned by changing the capacitance or inductance values, which can be accomplished by adjusting the capacitors or inductors in the circuit. By carefully tuning the frequency to a specific value, the oscillator can be applied to a variety of frequency control applications.

The AX7DBF3-150.0000C oscillator circuit consists of two main components: an inductor and a capacitor. The inductor is connected to a voltage source, while the capacitor is connected to ground. Together, they form a series resonance circuit, which is the basis of an oscillator. When a signal is applied to the circuit, the current will oscillate between the inductor and capacitor, creating a periodic signal. The frequency of this signal can be calculated by the equation “F=1/(2π * (L*C)^0.5)”, where L is the inductance of the inductor and C is the capacitance of the capacitor.

The frequency of the AX7DBF3-150.0000C oscillator can be adjusted by changing the value of either the inductor or capacitor. The capacitance is usually adjusted using a trimmer capacitor, while the inductance is usually adjusted using a variable coil or air core inductor. The amount of change is usually small, but it can be enough to achieve the desired frequency.

The AX7DBF3-150.0000C oscillator can be used in a variety of applications, such as frequency control in radio receivers and transmitters and time-base control in oscilloscope circuits. In radio receiver and transmitter circuits, the oscillator can be used to ensure that frequencies are accurately received or transmitted. In oscilloscope circuits, the oscillator can be used to control the time base, allowing the instrument to accurately display waveforms.

Overall, the AX7DBF3-150.0000C oscillator is an effective solution for applications that require frequency control or time-base control. Its series resonance circuit makes it very stable and reliable, and its adjustable frequency range makes it adaptable to the requirements of a wide variety of applications.

The specific data is subject to PDF, and the above content is for reference