AX7MBF1-148.5000T

Absolute Pull Range (APR):	--
Current - Supply (Disable) (Max):	67mA
Height - Seated (Max):	0.075" (1.90mm)
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Package / Case:	8-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	68mA
Operating Temperature:	-40°C ~ 85°C
Series:	Clearclock™ AX7
Frequency Stability:	±25ppm
Voltage - Supply:	2.5V
Output:	CML
Function:	Enable/Disable
Frequency:	148.5MHz
Type:	XO (Standard)
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

Oscillators are electronic components used to create periodic waveforms. They are widely used in a broad range of applications, including radio, computing, telecommunications, and instrumentation. The AX7MBF1-148.5000T oscillator, in particular, provides superior output stability and performance with a wide range of operating voltage and current.The AX7MBF1-148.5000T oscillator is a low jitter, sinusoidal oscillator with a frequency of 148.5000T and a phase noise of -120 dBc/Hz at 10 kHz offset. The operating current of the oscillator is typically between 40-50 mA. It is also equipped with an internal frequency control loop, which allows the output frequency to be adjusted to any desired value.The AX7MBF1-148.5000T oscillator is used in a wide range of applications, including cellular base stations, GPS receivers, satellite communication systems, oscillators, and radio receivers. In cellular base stations, it is used to generate reference signals for base band and radio transceivers. In GPS receivers, the oscillator is used to generate precision signals used for navigation and positioning. In satellite communication systems, the oscillator is used to generate the carrier signals for the uplink and downlink. The oscillator is also used in radio receivers to generate intermediate frequency (IF) signals.The working principle of the AX7MBF1-148.5000T oscillator is based on a feedback loop. The feedback loop is made up of two components: an oscillator circuitry and a feedback circuitry. The oscillator circuitry works in conjunction with the feedback circuitry to generate an output signal with a fixed frequency. The oscillator circuitry can be a Pierce oscillator, a ring oscillator, a Colpitts oscillator, a Clapp oscillator, or a Hartley oscillator.The feedback circuitry is the most important part of the oscillator. It uses the output signal from the oscillator circuitry to produce a feedback signal that is in phase with the output signal. The feedback signal is then amplified and fed back to the output of the oscillator circuitry. This establishes a stable feedback loop, which results in the oscillator producing a steady output signal of a fixed frequency.The AX7MBF1-148.5000T oscillator also uses an internal frequency control loop to adjust the output frequency. This frequency control loop is implemented using a phase-locked loop (PLL). The PLL consists of a phase detector, a low-pass filter, and a voltage-controlled oscillator (VCO). The phase detector measures the phase difference between the input frequency and the output frequency of the oscillator, and it then adjusts the VCO frequency so that the feedback loop is locked at the desired frequency. The AX7MBF1-148.5000T oscillator is a reliable and stable solution for many applications. It provides excellent output stability and performance with a wide range of operating voltage and current. It is also designed to be easy to use and maintain, making it a great choice for a variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description