AX7MBF4-480.0000C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

Oscillators are electronic circuits which produce alternating current signals at a certain frequency. They are used in a wide variety of applications, from radio frequency (RF) to high frequency (HF) signals. In this article, we will focus on the AX7MBF4-480.0000C oscillator and its application field and working principle.

AX7MBF4-480.0000C Oscillator

The AX7MBF4-480.0000C oscillator is a four-pole voltage-controlled crystal oscillator (VCO) designed to produce an output of up to 800 MHz. It is a low power, temperature-stable device that provides accuracy over temperature and drive voltage. The characteristics of the AX7MBF4-480.0000C oscillator include a wide frequency range of 4-850 MHz, a tuning accuracy of 2.1 ppm, wide phase noise of -95 dBc/Hz @ 10 kHz offset, and low power consumption of 0.6W. In addition, the device has an innovative blocking design that guarantees excellent self-resonance performance.

Application Field

The AX7MBF4-480.0000C oscillator is suitable for high-reliability and cost-sensitive consumer and industrial applications. It is ideal for communication, navigation, test and measurement, audio/video and other applications where reliable and stable frequency reference and timing signals are required. It is also suitable for radio frequency (RF) and clock related timing and communication applications, such as cellular phones, VoIP, Bluetooth, 2G/3G/4G CDMA, code division multiple access (CDMA), wideband code division multiple access (WCDMA) radio and base station timing and satellite navigation systems.

Working Principle

The AX7MBF4-480.0000C oscillator works by converting a direct-current input signal into an alternating voltage. This is achieved by using a quartz crystal element as a resonator. The quartz crystal oscillator is made up of two plates of piezoelectric material, like quartz, cut in such a way that one of the plates remains stationary and the other is vibrated by an input signal. When voltage is applied to the crystal element, the piezoelectric material undergoes a strain, which produces an elastic wave in the crystal element. The wave is then reflected back to the input terminal, generating a feedback voltage that will eventually be amplified and delivered back to the output terminal. By adjusting the input signal frequency, the output signal frequency can also be regulated. This process makes the AX7MBF4-480.0000C oscillator ideal for applications where a precise frequency output is required.

Conclusion

The AX7MBF4-480.0000C oscillator is a low power, temperature-stable device designed for high-reliability and cost-sensitive consumer and industrial applications. It is ideal for communication, navigation, test and measurement, audio/video and other applications where reliable and stable frequency reference and timing signals are required. The oscillator works by converting a direct-current input signal into an alternating voltage using a quartz crystal element as a resonator, and by adjusting the input signal frequency, the output signal frequency can also be regulated. This makes the oscillator ideal for applications where a precise frequency output is required.

The specific data is subject to PDF, and the above content is for reference