AX7MBF4-620.0000C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are circuits used to produce electrical waves, usually by amplifying signals in order to produce a periodic waveform such as a sine wave. Oscillators are commonly used in time-domain reflectometers (TDRs) to measure cable lengths, in audio and telecommunications systems, and in microwave communications. Oscillators are also used in power systems, where they stabilize alternating current (AC) voltages generated by power generators. One of the oscillators most widely used in today’s applications is the AX7MBF4-620.0000C Oscillator.

The AX7MBF4-620.0000C Oscillator is a high frequency, low jitter, low noise, variable frequency oscillator designed for use in telecommunications and measuring instrumentation. It operates over a wide frequency range of 18.6 MHz to 960 MHz and provides an extremely low jitter of less than 1.5 ps rms (20-80 MHz) and 5.0 ps rms (80-960 MHz). The AX7MBF4-620.0000C Oscillator is also a very stable oscillator, with frequency stability over temperature of +/-2 ppm over the operating temperature range of -40 to +85°C. The AX7MBF4-620.0000C Oscillator has an internal temperature compensation circuit and a reverse voltage protection circuit to ensure reliable and stable operation.

The primary application of the AX7MBF4-620.0000C Oscillator is in the field of telecommunications, including high speed applications such as Ethernet, Fibre Channel, Gigabit Ethernet, and 10 Gigabit Ethernet. The oscillator is also used in many test and measurement instruments such as oscilloscopes, signal generators, and radio frequency (RF) receivers and transmitters. It is also commonly used as the reference clock in clock recovery circuits such as phase-locked loops (PLLs), delay-locked loops (DLLs) and loop filters.

The working principle of the AX7MBF4-620.0000C Oscillator is based on the control of a synchronous digital logic circuit, such as a flip-flop, clock generator circuit, JTAG state machine, etc. In this oscillator, a steady-state frequency is generated using a frequency-dividing voltage-controlled oscillator (VCO) in an open-loop architecture. The oscillator is connected to an inverter, which is used to invert and amplify the input signal. The signal is then applied to the VCO, causing it to switch on and off, generating a periodic voltage waveform that corresponds to the signal’s frequency. This periodic voltage waveform is then amplified and tuned to the precise frequency range needed for the application.

The AX7MBF4-620.0000C Oscillator is an ideal choice for a wide range of applications, due to its low power consumption, wide frequency range, low jitter, and high stability over temperature. Its primary application is in the field of telecommunications, but it can also be used in a number of other applications, such as test and measurement instruments, RF receivers and transmitters, and clock recovery circuits. The oscillator’s working principle is based on the control of a synchronous digital logic circuit, which is used to generate a steady-state frequency.

The specific data is subject to PDF, and the above content is for reference