AX7MCF1-2000.0000T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are devices that generate a periodic waveform, such as a sine wave, using a variety of different means. Oscillators are essential components in a wide variety of applications, such as signal generators, radios, clocks, and computer communication systems. The AX7MCF1-2000.0000T is a popular oscillator for a variety of applications and can be used in many different fields. This article will discuss the application field and working principles of the AX7MCF1-2000.0000T.

The AX7MCF1-2000.0000T is a CMOS oscillator that operates at an 8.000M/8.100M/8.500M/8.850M frequency and features a 3-pin design, very low power consumption, and a very small package size. This oscillator is often used in applications such as automotive, consumer electronics, and communications. It is also suitable for use in applications that require very low-noise working environments, such as cellular base stations.

The AX7MCF1-2000.0000T is a highly reliable and stable device suitable for precision timing applications. It features a low jitter of ± 148 ps, and a low phase noise of -174.5 dBc/Hz at 5MHz offset. It also has a very wide temperature range of -40 to + 85°C. The AX7MCF1-2000.0000T is also available in both an 8-lead and an 8-pin, surface-mount package, making it suitable for a variety of different applications.

The oscillator circuit of the AX7MCF1-2000.0000T is designed so that it can generate a periodic waveform. The oscillator circuit consists of two main components: an oscillator and a frequency-determining component. The oscillator is responsible for generating an oscillating signal, while the frequency-determining component is responsible for setting the frequency of the oscillating signal.

The oscillator of the AX7MCF1-2000.0000T is made up of a CMOS inverter circuit. The inverter circuit is made up of two N-type and two P-type transistors connected in a loop. The input signal is sent to the N-transistors, which in turn switch the output from the P-transistors. This switching creates an oscillating waveform.

The frequency-determining component is responsible for setting the oscillator\'s frequency. In the case of the AX7MCF1-2000.0000T, this component is made up of a resistor, capacitor and an inductor. The resistor and the capacitor form an RC network, which is connected in parallel to the inductor. The combination of the three components determines the frequency of the oscillator.

The AX7MCF1-2000.0000T oscillator is a highly reliable and stable device. It features a very low power consumption, and a very small package size. Its low jitter and low phase noise make it suitable for precision timing applications. It is also suitable for use in a variety of different applications and is a popular choice for automotive, consumer electronics, and communications.

The specific data is subject to PDF, and the above content is for reference