AX7PAF1-705.8000C Crystals, Oscillators, Resonators

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are electronic circuit components that produce oscillatory electric signals, commonly known as sine waves which are often used in electric timing circuits as components of timing elements. An AX 7PAF1-705.8000C oscillator is a type of oscillator component designed for low frequency and low power applications with precise timing. This particular oscillator displays useful features such as low standby current, low power consumption, low V c-tolerance and high stability. Additionally, it is reliable, long-lasting component and can be used in a variety of low-voltage applications.

The AX 7PAF1-705.8000C oscillator is a standard 8-pin ceramic oscillator. Its over-all dimensions are 1.21mm × .91mm with a total height of .98mm. This oscillator is an AT-Cut resonator based type and is made of a multi-layer ceramic material. It has an operating voltage of 2.5V to 5.5V and a temperature range of -20°C to 70°C. It has an operating frequency of 7.0 MHz with ±0.5% stability. It has an estimated current consumption of 1.2mA and a tolerable voltage of 5 pF.

The AX 7PAF1-705.8000C oscillator has many possible applications ranging from medical to computing industries. Due to its low power consumption, it is especially beneficial in battery operated applications such as mobile phones or portable medical devices. Additionally, it is ideal for pulse generation and low-frequency signal generation, thereby making it suitable for low-frequency applications in the computing industry including embedded systems and clock generation operations.

The AX 7PAF1-705.8000C oscillator is designed to operate in an active mode. This type of oscillator requires an active filter in order to generate a sine-wave output. This active filter is usually composed of an amplifier and resistors that form a particular type of feedback loop. This feedback loop creates an oscillation effect, wherein the input will flow through the filter and then return to the input port again, causing the loop to continuously repeat. The output of this filter is a sine-wave that can be produced at the desired frequency. The output frequency is adjusted using a trimmer component, allowing the circuit to be finely tuned until the desired output is achieved.

In conclusion, the AX 7PAF1-705.8000C oscillator is a reliable, low-cost, low-power oscillator component designed for precision timing applications. It is lightweight and can be used in a range of applications across the medical and computing industries. Its active mode operation requires an amplifier and resistors to generate a sine-wave output at the desired frequency, making it ideal for low-frequency applications.

The specific data is subject to PDF, and the above content is for reference