AX7PAF1-804.7038C Crystals, Oscillators, Resonators

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

An oscillator is a device that generates a continuously repeating waveform by converting energy from another source into electrical energy. Oscillators are used in a variety of applications, including signal generators, communication systems, and even audio equipment. One type of oscillator, the AX7PAF1-804.7038C, is a digital waveform synthesizer with an on-board frequency synthesizer and advanced phase-locked loop (PLL) technology. This oscillator is widely used in audio, industrial, and military applications.

AX7PAF1-804.7038C Application Field

The AX7PAF1-804.7038C oscillator is typically used in a variety of applications including audio, industrial, and military. This type of oscillator is primarily used to generate high-voltage pulses or narrow-band waves with a dynamic range of up to 37dB. This frequency synthesizer is also commonly used in communications systems such as GSM, GPRS, and Wi-Fi. Additionally, it has been used in a variety of other applications such as metal detection, machine vision, and X-ray spectroscopy.

AX7PAF1-804.7038C Design

The AX7PAF1-804.7038C oscillator is based on a PLL technique and is composed of several components, including; a phase-frequency detector, voltage-controlled oscillator, filter, and a duty-cycle generator. It also provides a low-phase distortion and low noise clock output, along with a shielded metal enclosure for better protection. The oscillator is designed to be rugged and reliable for use in harsh environments. The oscillator has a working frequency ranging from 1 MHz to 22 GHz, and a supply voltage of +3.3 V to +5.0 V.

AX7PAF1-804.7038C Working Principle

The AX7PAF1-804.7038C oscillator works by first generating a reference signal from a voltage-controlled oscillator (VCO). This VCO is then fed into a phase-frequency detector (PFD) which compares the two signals and produces an error signal. This error signal is then used to adjust the output frequency of the VCO to be the same as the reference signal. The output of the PFD is then fed into a low-pass filter to remove any high-frequency components, and a duty-cycle generator is used to shape the signals into desired waveform. Finally, the generated waveform is amplified and sent to the desired output.

Conclusion

The AX7PAF1-804.7038C oscillator is a highly complex piece of equipment, capable of generating high-voltage pulses or narrow-band waves. It is often used in audio, industrial, and military applications, and can provide up to 37dB dynamic range. It operates on a PLL-based principle and consists of several components, including a VCO, PFD, filter, and duty-cycle generator. By using these components in combination, the oscillator is able to generate the desired waveforms.

The specific data is subject to PDF, and the above content is for reference