AX7PAF4-250.0000C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators serve a variety of applications in products ranging from small handheld devices to large industrial systems. In many of these products, the time incessantly by external signal, and this is the primary purpose of the AX7PAF4-250.0000C oscillator. The AX7PAF4-250.0000C is an oscillator composed of an integrated circuit (IC) and crystal that helps regulate timing with high accuracy and precision.

The AX7PAF4-250.0000C oscillator is a device used to generate a frequency or pulse signal. It is typically used in digital systems where time-accurate signals are critical. The AX7PAF4-250.0000C is an example of a crystal oscillator that utilizes Piezoelectric effect of quartz to produce an output of a fixed frequency. It consists of an integrated circuit (IC), a quartz crystal cut to a specific resonant frequency, capacitors, and other components to provide a stable frequency output.

The working principle of AX7PAF4-250.0000C oscillator is based on the Piezoelectric effect of quartz. Piezoelectric effect is the ability of certain materials to generate an electrical charge when subjected to mechanical stress. This effect is used in the AX7PAF4-250.0000C oscillator to control the output frequency.

The AX7PAF4-250.0000C oscillator requires a combination of a quartz crystal and an IC to generate its output signal. The quartz crystal acts as a resonator and is cut to a specific resonant frequency, which determines the output frequency of the oscillator. The IC drives the quartz crystal with a fixed frequency. The quartz crystal then vibrates at a stable frequency and generates an output signal. The capacitors connected to the quartz crystal form a parallel resonant circuit, which helps stabilize the output frequency.

The AX7PAF4-250.0000C oscillator is widely used in embedded systems and consumer applications. It is commonly used for clock and timing control applications such as general-purpose timers, clock generator circuits, and microprocessor and microcontroller clock drivers. It is also used in applications that require precise timing such as digital signal processing, frequency measurement and modulation, phase-locked loops, and power management.

The AX7PAF4-250.0000C oscillator provides reliable, precise and low jitter timing solutions for a wide range of applications. It is a low-cost solution for embedded applications, and its output frequency is stable, produces low-jitter, and is highly accurate. The AX7PAF4-250.0000C is a reliable, cost-effective choice for embedded applications and consumer products.

The specific data is subject to PDF, and the above content is for reference