AX7PBF2-983.0400T

Absolute Pull Range (APR):	--
Current - Supply (Disable) (Max):	86mA
Height - Seated (Max):	0.075" (1.90mm)
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Package / Case:	8-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	94mA
Operating Temperature:	-40°C ~ 85°C
Series:	Clearclock™ AX7
Frequency Stability:	±25ppm
Voltage - Supply:	2.5V
Output:	LVPECL
Function:	Enable/Disable
Frequency:	983.04MHz
Type:	XO (Standard)
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Oscillators are electronic components that generate an alternating current or voltage over a specified frequency range. They are used extensively in all types of electronic equipment and applications, from consumer to industrial electronics. The AX7PBF2-983.0400T is an oscillator, specifically an x-ray radio frequency oscillator, used in applications such as medical imaging, X-ray imaging, and other fields where x-ray radiation is required. This article will discuss the application field and working principle of the AX7PBF2-983.0400T oscillator.

The Application Field

The AX7PBF2-983.0400T x-ray radio frequency oscillator is primarily used in medical imaging applications. It is designed to emit x-rays at a specific frequency, which can then be used to image objects or organs inside the body. It is usually used in computed tomography (CT) systems, as well as in other imaging systems, where an x-ray source is needed.The AX7PBF2-983.0400T oscillator is also used in industrial x-ray imaging applications such as non-destructive testing of materials, or in spectroscopy where x-rays are used to study the structure of materials. The x-ray source in these applications is usually operated in continuous wave mode, where the power output is set and maintained at a specified level.

Working Principle

The working principle of the AX7PBF2-983.0400T oscillator is based on the principle of Radio Frequency (RF) oscillations. It consists of a tube filled with a gas such as Helium or Xenon. When a high-voltage anode is connected to the tube, electrons accelerate in the tube, and when they collide with the gas atoms, they excite them into a higher energy state. The excited atoms then emit radiation in the form of x-rays.The oscillator works by controlling the frequency of the oscillations created in the tube. This is done by varying the voltage applied to the anode, and the frequency of the oscillations can be adjusted over a wide range. The frequency can be adjusted by using a frequency synthesizer, or by using an external signal source.

Conclusion

The AX7PBF2-983.0400T x-ray radio frequency oscillator is a device used in applications requiring x-ray radiation. It is primarily used in medical and industrial imaging applications. The working principle of the oscillator is based on the principle of RF oscillations, which can be adjusted over a wide range by varying the voltage applied to the anode.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description