AZ23B43-G3-08

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The AZ23B43-G3-08 is a Zener diode array, specifically an Anode Series Voltage Regulator. It is used for protection and voltage regulation in electronic circuits. Such diode arrays provide an economical and easy way to protect circuits against short-circuits, transients and high voltage.

A Zener diode array is a type of component commonly used for a variety of applications in electronic circuits. It typically consists of several Zener diodes connected in series in order to provide higher voltage protection and voltage regulation, as well as better protection against transient overvoltage spikes and high voltage.

The AZ23B43-G3-08 is designed to provide an anode voltage of 8 volts and is designed with a maximum peak anode current of 150 mA. This component can be used to protect sensitive components such as circuits using precision tracking and even sensitive analog amplifiers.

The working principle of the AZ23B43-G3-08 is based on the characteristic of the Zener diode which allows current flow in one direction when forward biased, and opposite direction when reverse bias. When the forward voltage applied to the diode exceeds its threshold value or breakdown voltage, a large current flows in the opposite direction. This phenomenon is called Zener breakdown and it is the main property that is exploited in Zener diodes and Zener diode arrays such as the AZ23B43-G3-08.

Zener breakdown limits the peak anode voltage to a predetermined level, while at the same time allowing current to flow in the opposite direction. This usually happens when the voltage applied to the anode of the diode exceeds its breakdown voltage. The breakdown voltage is the level at which the diode begins to conduct current in the reverse direction. The AZ23B43-G3-08 is designed with a breakdown voltage of 8V, meaning that any voltage over 8V will cause it to conduct in the reverse direction and will prevent the anode voltage from exceeding 8V.

The AZ23B43-G3-08 can also be used for voltage regulation, as it is able to limit the voltage on a circuit to a predetermined level thus preventing any further increases. This is done by taking advantage of the fact that the diode cannot allow current to pass through it until the voltage across it reaches a certain level. This way, once the voltage reaches this level, the diode begins to conduct and limits the voltage to that exact value.

In conclusion, the AZ23B43-G3-08 is a Zener diode array which provides protection against transients and high voltage, as well as voltage regulation. It works based on the principle of Zener breakdown, which is a characteristic of Zener diodes allowing them to conduct in the reverse direction in order to limit the anode voltage to a predetermined level. This form of voltage regulation is an economical and efficient way to provide circuit protection and voltage regulation.

The specific data is subject to PDF, and the above content is for reference