B1S-G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are electronic components that are used for various purposes. They are basically used for rectification, i.e. converting AC to DC signal. Diodes are simple two-terminal devices that act as a one-way switch for current. Bridge rectifiers are diodes configured in a bridge configuration which is used to rectify AC signals to obtain DC signal. Bridge rectifiers are used in many applications. One of the most commonly used bridge rectifier is the B1S-G bridge rectifier.

The B1S-G bridge rectifier is a four diode bridge configuration with its anodes being connected at the four corners and its cathodes being connected at the center. It is a general purpose bridge rectifier with a wide variety of applications. The B1S-G bridge rectifier is capable of handling up to 1 Amp of peak current frequencurrently up to 100KHz. It is also able to handle high voltage up to 1000V.

One of the major applications of the B1S-G bridge rectifier is in DC power supplies. The four diodes in the bridge rectifier configuration can convert the AC signal from the source to a pulsating waveform. This waveform is then smoothed using a smoothing capacitor to obtain a DC voltage and current. The B1S-G bridge rectifier is also used in AC power supplies and AC to DC converters. It can also be used for motor speed control, line-frequency filtering and battery-charging applications.

The working principle of the B1S-G bridge rectifier is based on the control of diode current. The current through the four diodes in the configuration is always the same, and the voltage across the diodes can be controlled by varying the external DC supply voltage. When the input AC voltage is greater than the DC supply voltage, the diodes become forward biased and current is allowed to flow through them. When the input AC voltage is less than the DC supply voltage, the diodes become reverse biased and current is blocked.

The B1S-G bridge rectifier is a versatile device and has a wide range of applications. It is used to convert AC to DC signal in various applications such as power supplies, AC to DC converters, motor speed control, line-frequency filtering and battery-charging. The four diodes are arranged in a bridge configuration, and the current through the diodes is controlled by varying the external DC supply voltage.

The specific data is subject to PDF, and the above content is for reference