Allicdata Part #: | B2M-E3/45GI-ND |
Manufacturer Part#: |
B2M-E3/45 |
Price: | $ 0.47 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | Vishay Semiconductor Diodes Division |
Short Description: | DIODE BRIDGE 0.5A 200V 4DIP |
More Detail: | Bridge Rectifier Single Phase Standard 200V Throug... |
DataSheet: | B2M-E3/45 Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 0.42210 |
10 +: | $ 0.36792 |
25 +: | $ 0.34499 |
100 +: | $ 0.27997 |
250 +: | $ 0.26145 |
500 +: | $ 0.22434 |
1000 +: | $ 0.17798 |
2500 +: | $ 0.16407 |
5000 +: | $ 0.15479 |
Series: | -- |
Packaging: | Tube |
Part Status: | Active |
Diode Type: | Single Phase |
Technology: | Standard |
Voltage - Peak Reverse (Max): | 200V |
Current - Average Rectified (Io): | 500mA |
Voltage - Forward (Vf) (Max) @ If: | 1V @ 500mA |
Current - Reverse Leakage @ Vr: | 5µA @ 200V |
Operating Temperature: | -55°C ~ 150°C (TJ) |
Mounting Type: | Through Hole |
Package / Case: | 4-DIP (0.200", 5.08mm) |
Supplier Device Package: | MBM |
Base Part Number: | B2 |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Diodes - Bridge Rectifiers: B2M-E3/45 Application Field and Working Principle
Bridge rectifiers are a type of diode array commonly used to convert alternating current (AC) power into direct current (DC) power. The bridge rectifier circuit is used in power supplies and adapters, and is available in a number of varieties that differ in the number of diodes and the amount of input and output current they can handle. Among them, B2M-E3/45 bridge rectifiers have a special application field and working principle which will be discussed as follows.
Application Field
Generally speaking, the B2M-E3/45 is a full-wave single-phase bridge rectifier mainly used to convert the alternating current from the AC power grid into a direct current suitable for using in many output stages. Thus, it can be used in a wide range of applications, from isolated DC/DC converters, DC UPS circuits, solar systems, etc., to AC-DC power supplies, motor speed controls, electric welding machines and more. Specifically, its maximum rated current is 40A and its maximum non-repetitive peak current is 45A, both of which make its applicable input AC voltage range quite vast, covering different frequencies such as 50 Hz, 60 Hz, 400 Hz and more.
Working Principle
The B2M-E3/45 bridge rectifier works in the following manner. First, the input AC voltage passes through the four diodes, and the circuit is then polarized. A positive voltage is applied to one side of the bridge rectifier, while the other side is connected to negative voltage. As AC voltage alternates, the forward-biased and reverse-biased directions of the four diodes switch alternately. As the current passes through the four diodes, each of them makes the positive voltage on one side of the bridge rectifier pass through to the other side, ultimately resulting in the output of direct current. The output DC voltage for the B2M-E3/45 is variable based on different input AC voltages, which functions as an amplifier in order to ensure the stable output current.
Conclusion
Bridge rectifiers, like the B2M-E3/45, are one of the most fundamental components of power and energy systems. As was seen in the discussion above, they have a wide range of applications, and their working principle ensures that they produce sufficient direct current output for a number of uses. As such, their design and usage are extremely important, and continuous research and innovation are needed in order to maximize their effectiveness and efficiency.
The specific data is subject to PDF, and the above content is for reference
BRIDGE RECT 1PHASE 1KV 2A KBPMBridge Rec...
IC BRIDGE RECT 1.5A 100V WOMBridge Recti...
IC BRIDGE RECT 1.5A 50V WOMBridge Rectif...
RECT BRIDGE 1200V 90A MTKBridge Rectifie...
RECT BRIDGE 1A 240VBridge Rectifier Sing...
BRIDGE RECT 3 PHASE 800V 58ABridge Recti...