B32621A4103J189

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Film capacitors, also known as plastic film capacitors, are a type of capacitor that is made from a long insulated plastic film that is rolled up. This is usually wrapped around a core of another material, such as ceramic or tantalum, and then the core is encased in a protective casing. These capacitors have the ability to store energy and they are used in a wide range of applications. The B32621A4103J189 is one such type of film capacitor.

The actual application of the B32621A4103J189 will depend on the specific system that it is being used in. In general, these capacitors are used in voltage calculation, power smoothing, decoupling and frequency tuning. This type of capacitor is also used in motor control systems, LED lamps, and various other electronic devices. The B32621A4103J189 is designed for use in high voltage systems where high ripple current and low impedance are desired.

The B32621A4103J189 has a capacitance of 103 uF and it has a voltage rating of 350 volt. It is also a non-polar capacitor, meaning that the voltage rating can be applied in either direction. This type of capacitor also has a low ESR, or equivalent series resistance, which is less than 0.4 Ohms. This makes it ideal for use in applications where high ripple current, low impedance, and low ESR are desired.

In terms of working principle, the B32621A4103J189 works in the same way as any other capacitor. It stores and releases energy in the form of an electric charge when voltage is applied to it. The capacitor works by accumulating electrical energy on its plates and then releasing when the electrical field strength between the plates is reduced. This energy is released in the form of current flowing in the circuit.

To maximize the performance of the B32621A4103J189 film capacitor, it is important to select the right type of dielectric material for the insulation. The dielectric material must have a low dielectric loss to ensure that the capacitor is able to store and release energy efficiently. Additionally, the insulation material should also be able to withstand higher temperatures due to the high voltage that may be encountered in some applications.

The B32621A4103J189 is a high quality film capacitor which is designed for use in high voltage applications. It has a capacitance of 103 uF and a voltage rating of 350 volt, as well as a low ESR. As such, it is an excellent choice for applications where large amounts of energy storage and release is required. Additionally, the selection of the right dielectric insulation material is also important to ensure that the capacitor can operate efficiently at higher voltages.

The specific data is subject to PDF, and the above content is for reference