B32653A4105J000

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Film capacitors, also known as plastic film capacitors, polymer film capacitors and plastic capacitors, are one of the more common types of capacitors used in electronics. There are many different types of film capacitors, including the B32653A4105J000. This capacitor is suitable for applications in industrial, professional and consumer electronics and has a range of specifications to match the requirements of each application. The construction and operating principle of the B32653A4105J000 provide a range of capabilities for a variety of applications.

The B32653A4105J000 capacitor is constructed with a dielectric of Polyphenylene Sulphide (PPS) film, which is a thermally stable and highly reliable material. The film is wound around a cylinder-shaped steel housing, which provides an additional level of protection against mechanical damage and encloses the capacitor to ensure that the dielectric stays in place during operation. The base of the housing features two stainless steel plates that make contact with both ends of the dielectric film. The two plates are electrically insulated to provide two electrical connection points on the outside of the housing.

The B32653A4105J000 capacitor works using the principle of electrostatic attraction between two electrically charged plates. When a voltage is applied to the terminals of the capacitor, an electric field is created between the two plates and the dielectric sheet. This causes the plates to attract each other, with the charge on one plate attracting the opposite charge on the other. The dielectric sheet prevents the two plates from touching each other, storing the charge and acting as an insulator.

The B32653A4105J000 is primarily used in power supplies, medical electronics, avionics, aircraft systems, battery charging, and other high-reliability, large-current industrial or professional applications. It is well-suited for applications that require noise suppression, voltage equalization, decoupling, and high-frequency impedance stabilization. The capacitor is also suitable for motor inrush control, pump control systems, and high-frequency switching power supplies. Due to its relatively low reactance, it is also suitable for applications that require low ESR and high ripple current ratings.

The B32653A4105J000 features an endurance test with a lifetime of 2000 hours at +85 degrees Celsius and an operating temperature range of –40 to +125 degrees Celsius. The capacitor features a voltage rating between 630VDC and 400 Volts Rapid Surge, a capacitance range of 0.1 to 22µF, and a capacitance tolerance of ±10%. It also features a low Equivalent Series Resistance (ESR) of 0.3mΩ/µF and a maximum insulation resistance of 100MΩ.

The B32653A4105J000 is a high-quality, reliable capacitor that is perfect for a wide range of applications. The capacitor is manufactured to meet industry standards for electrical and mechanical parameters, making it suitable for use in extreme temperature and humidity conditions. The capacitor\'s high breakdown voltage, low leakage current, and low ESR make it ideal for applications that require a stable voltage output over varying load conditions.

The specific data is subject to PDF, and the above content is for reference