B39182B9488P810

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SAW filters have been in use since the 1970s for a variety of commercial and military applications. Today, SAW filters have become commonplace and are used in telecommunications, industrial, automotive, biomedical and consumer applications. B39182B9488P810 is one such SAW filter.

SAW filters are typically composed of two sheet-like membranes or layers of materials. On the top surface of the upper sheet is a metal layer that operates as an antenna receiving electromagnetic signals from the surrounding environment. The second layer on the bottom sheet is a piezoelectric material which responds to the generated wave vibrations from the top layer. The resulting signal is amplified and passed through the filter.

The B39182B9488P810 SAW filter is an example of a high-performance filter capable of blocking unwanted signals and allowing specific frequencies to pass through. It is composed of multiple layers of gold and barium titanate which act as an electrode and piezoelectric electrostrictor, respectively. The top layer is made up of a conductive metal which is patterned into a specific antenna design. This is then connected to the bottom layer which is a dielectric substrate. The dielectric substrate acts as a filter, allowing signals within a specific frequency range to pass through while blocking those signals outside the frequency range.

The B39182B9488P810 operates in a wide variety of application fields such as Bluetooth, WiFi, RFID, automotive navigation, consumer electronics, and medical applications. It is also used in microwave systems for satellite communications, radar systems, and avionics systems. For example, the filter is used by car manufacturers to optimize the Bluetooth audio quality and minimize the interference caused by other Bluetooth devices used within the car. It also helps vehicle navigation systems to minimize reception interference and improve signal accuracy.

The working principle of the B39182B9488P810 SAW filter is based on the piezoelectric effect. When electromagnetic waves are incident on the antenna layer, they vibrate the antenna and generate a piezoelectric wave. This piezoelectric wave is amplified and passed through the filter, blocking the undesired radio frequency and allowing only the frequencies within the specific range to pass through. The result is a high fidelity signal with minimal interference.

In summary, the B39182B9488P810 SAW filter is a high-performance filter used in a variety of application fields. Its layers consist of metal and prisms which respond to the generated wave vibrations resulting from the antenna layer. The working principle is based on the piezoelectric effect which allows only the frequencies within the specific range to pass through while blocking those signals outside the frequency range.

The specific data is subject to PDF, and the above content is for reference