B39232B3920U510

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SAW filters are a type of electronic filter typically used in electronic communications systems for coupling between stages of amplification or selectivity and are especially useful for broadband communications. The B39232B3920U510 is a surface acoustic wave (SAW) filter that is designed for use in mobile phones, wireless networks, and RFID systems.

Surface acoustic wave (SAW) filters are the most common type of filter used in wireless communications. SAW filters are composed of two or more piezoelectric layers that vibrate at a specific frequency. When a voltage is applied to the piezoelectric layers, a wave is propagated across the surface of the filter. This wave reflects off of the edges of the filter, and when a certain number of these reflections combine with one another, they form a standing wave pattern. The SAW filter will then only allow energy with the correct frequency to pass through.

The B39232B3920U510 SAW filter is a high-reliability, high-performance filter that is designed for use in a variety of applications. It is used in mobile phones as a selectivity filter to reject interference while passing the desired signals. It is also used in RFID systems to reduce system interference and improve signal-to-noise ratio. In wireless networks, the B39232B3920U510 is used as a band-pass or low-pass filter to filter out unwanted signals.

The B39232B3920U510 has a high attenuation of up to 50dB and a wide frequency range from 824MHz to 849MHz. It has a very low insertion loss of 0.6dB and a very low group delay of 15ns. It also has a very high stability over temperature and a high RF power handling capability of up to +25dBm RMS.

The working principle of the B39232B3920U510 SAW filter is relatively simple. When a signal of the desired frequency is applied to the filter, the acoustic wave is produced and propagates across the filter surface. The wave reflects off of the edges and these reflections combine with one another to form a standing wave pattern. This pattern allows only energy of the correct frequency to pass through, while other frequencies are attenuated and rejected.

In conclusion, the B39232B3920U510 is a high-reliability, high-performance surface acoustic wave (SAW) filter that is used in a variety of applications. It has a high attenuation and a wide frequency range, and it also has a very low insertion loss and a very low group delay. The working principle of the filter is relatively simple, and it is able to reject unwanted frequencies while allowing the desired signals to pass through.

The specific data is subject to PDF, and the above content is for reference