B39871B3903U510

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SAW filters (surface acoustic wave filters) are signal processing components, which are based on the properties of acoustic wave propagation. Unlike other passive filters, such as RC or LC filters, SAW filters can be used to center in on specific frequency ranges from a broader spectrum of signals. Consequently, SAW filters have a wide range of application fields.

The B39871B3903U510 SAW filter is one of the most commonly used SAW filter designs. This filter has a center frequency of 10.250GHz and a bandwidth of 1000MHz. It is typically used in systems that require an extremely broad frequency range for operation, such as in radar systems and antenna systems. It is also used in a variety of other types of communications systems.

The B39871B3903U510 SAW filter works by using a number of transceiving acoustic wave transducers, which are placed between two pieces of substrate material to form a resonator cavity. When a signal passes through this cavity, the transducers convert the signal into a transverse acoustic wave, which is then propagated through the cavity. The frequency of the signal is determined by the length and width of the cavity, so by manipulating the width and length of the cavity, the frequency of the signal can be changed.

The SAW filter then passes the signal that is determined by the width and length of the resonator cavity, and this signal is then passed through a series of bandpass filters, which are used to filter out any remaining unwanted frequencies. Finally, the signal is then passed through a power amplifier, which is used to boost the signal strength. This amplified signal is then directed to its intended destination.

The B39871B3903U510 SAW filter is an ideal choice for a variety of applications, such as base stations for wireless networks, satellite communications, and data transmission. With its ability to pass only those frequencies that specifically correspond to the resonator cavity dimensions, it provides high levels of signal accuracy even when used in extremely noisy environments. The B39871B3903U510 SAW filter is also an ideal choice for applications that require the ability to filter signals in a broad frequency range, without the introduction of spurious signal noise.

The specific data is subject to PDF, and the above content is for reference