Allicdata Part #: | B4M-E3/45-ND |
Manufacturer Part#: |
B4M-E3/45 |
Price: | $ 0.18 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | Vishay Semiconductor Diodes Division |
Short Description: | DIODE BRIDGE 0.5A 400V 4DIP |
More Detail: | Bridge Rectifier Single Phase Standard 400V Throug... |
DataSheet: | B4M-E3/45 Datasheet/PDF |
Quantity: | 1000 |
5000 +: | $ 0.15479 |
Series: | -- |
Packaging: | Tube |
Part Status: | Active |
Diode Type: | Single Phase |
Technology: | Standard |
Voltage - Peak Reverse (Max): | 400V |
Current - Average Rectified (Io): | 500mA |
Voltage - Forward (Vf) (Max) @ If: | 1V @ 500mA |
Current - Reverse Leakage @ Vr: | 5µA @ 400V |
Operating Temperature: | -55°C ~ 150°C (TJ) |
Mounting Type: | Through Hole |
Package / Case: | 4-DIP (0.200", 5.08mm) |
Supplier Device Package: | MBM |
Base Part Number: | B4 |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Diodes are the most common type of semiconductor used in electronic devices. They are used to convert alternating currents (AC) to direct currents (DC) in many different applications. One type of diode is the bridge rectifier, which is used to convert AC to DC power efficiently. The B4M-E3/45 bridge rectifier is widely used in applications such as switching power supplies, regulated power supplies, uninterruptible power supplies and motor controllers.
The B4M-E3/45 is a four-diode Silicon Bridge Rectifier. It is a single-phase, dual rectifier built in compliance with UL 94V-0 rated flame retardant plastic material. It has an operating temperature range of -55°C to 125°C and is capable of withstanding a surge current of up to 40A. Its maximum continuous current rating is 45A, making it one of the most powerful bridge rectifiers on the market.
The B4M-E3/45 operates by using full-wave rectification to transform alternating current input (AC), into direct current output (DC). In order for this to happen, two sets of diodes must be connected as a ‘bridge’ circuits. Diodes only allow electricity to flow in one direction, meaning that the alternating current that enters the bridge rectifier is transformed into a unidirectional current with equal positive and negative voltage. The AC is then filtered and regulated to produce an output of DC power.
The B4M-E3/45 is an ideal, highly reliable, and cost-effective solution for a number of switching power, regulated power, and motor controller applications. With its high current rating, surge protection, and low power consumption, it is an ideal choice for many applications. Moreover, the B4M-E3/45 has a peak efficiency rating of 95%, making it one of the most efficient bridge rectifiers on the market.
In conclusion, the B4M-E3/45 bridge rectifier is a reliable and efficient solution for a variety of applications where AC needs to be converted into DC efficiently. Its four-diode Silicon Bridge design and high performance ratings make it an indispensable tool in the modern electrical engineer’s toolbox. This bridge rectifier is a popular choice for a number of power supply and motor controller applications, and is sure to continue evolving and improving in the near future.
The specific data is subject to PDF, and the above content is for reference
BRIDGE RECT 1PHASE 1KV 2A KBPMBridge Rec...
IC BRIDGE RECT 1.5A 100V WOMBridge Recti...
IC BRIDGE RECT 1.5A 50V WOMBridge Rectif...
RECT BRIDGE 1200V 90A MTKBridge Rectifie...
RECT BRIDGE 1A 240VBridge Rectifier Sing...
BRIDGE RECT 3 PHASE 800V 58ABridge Recti...