B57364S2100A2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Inrush Current Limiters (ICL) provide protection against excessively high inrush current, helping to minimize potential harm to circuitry and equipment. We can classify B57364S2100A2 as an ICL. This device is capable of limiting inrush current by connecting a load-side resistor in series and then controlling current flow with a solid-state switch.

A B57364S2100A2 ICL is typically used in power supplies, DC/DC converter, motor control, and other applications to help regulate inrush currents. It offers a wide range of protection capabilities, such as a current limiting resistance that limits inrush current to a maximum specified level, a short-circuit protection that prevents a short-circuit current from being drawn, and an overvoltage protection that prevents accidents caused by voltage surges.

The B57364S2100A2 ICL consists of a power MOSFET, the main components in an ICL. Connected to a gate, source, and drain, the MOSFET stores energy required for the inrush current limiting. When energized, the MOSFET starts to latch into its conduction range and will store energy, while an internal drive circuit keeps the controllable MOSFET operating at its rated current (set by a current set resistor). This prevents excessive currents from entering the power supply; otherwise the inrush current would draw too much energy from electric power system.

The B57364S2100A2 ICL also features a built-in timer circuit, which is operated by a logic control circuit. The timer function gates the power MOSFETs on and off, thereby providing a reliable protection against overload. Besides, self-resetting and short-circuit protections are integrated into the device. When the voltage drops, the self-resetting protection will restore the output current as normal. In case of a short-circuit, the current limiting mode will be applied.

In conclusion, B57364S2100A2 is an Inrush Current Limiter (ICL) that helps to regulate excessive inrush current for power supplies, DC/DC converters, motor control, and other applications. It combines the features of gate drive, current limiting resistor, short-circuit protection, and overvoltage protection. Through controlling the current with a solid-state switch, it ensures the power supply has a safe and non-interference performance.

The specific data is subject to PDF, and the above content is for reference