B72214P2211K101

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS (Transient Voltage Suppressor) diodes are a type of surge protection device used to protect against the sudden voltage and power surges in a circuit, often caused by lightning strikes. Varistors, also known as voltage dependent resistors, are used to absorb potentially damaging excess current and prevent it from reaching downstream electronics. MOV (Metallized Oxide Varistors) provide reliable protection from transient overvoltages caused by lightning, power switching, electrostatic discharge, and other voltage transients. Varistor and MOV combination products provide higher levels of protection by combining ESD and transient protection in a single component.

B72214P2211K101 is a varistor and MOV combination product designed for commercial and industrial applications. This component features a dv/dt rating of 300V/µs. It also has a unidirectional and bi-directional surge capability of up to 1500A (8/20 microsecond pulse).

Among its many features, this varistor and MOV combination product offers high surge capability, fast response, and low clamping voltage. The combination of the high surge capability and low leakage current provides higher levels of reliability and protection than the individual components. Additionally, its fast response time and low clamping voltage reduce the amount of energy required to protect against surge events.

The B72214P2211K101 varistor and MOV combination product works by allowing an overvoltage on the protected line to be clamped to a safe voltage level. The device works as a combination of a varistor and a MOV. The varistor is typically connected in parallel to the protected line. When an overvoltage occurs, the varistor provides a low impedance path for the current to flow. This diverts the excess energy away from the protected line and reduces the voltage.

The MOV then takes on a resistor role and dissipates the excess energy by converting it into heat. During normal operation, the MOV has a high resistance, which does not significantly affect the circuit. Under an overvoltage condition, the MOV rapidly changes to a lower resistance, allowing current to flow. This leakage current is used to absorb the excess energy and dissipates it, thus reducing the voltage.

The B72214P2211K101 varistor and MOV combination product has a wide range of applications, ranging from industrial equipment and office appliances to consumer electronics. In particular, this device is suitable for protecting against overloads caused by lightning, electrostatic discharge, and other transient over voltages. The device can also be used to protect against power line transients, power switching, and power quality disturbances.

The B72214P2211K101 varistor and MOV combination product provides reliable transient protection for a wide range of commercial and industrial applications. Its fast response time, low clamping voltage, and high surge capability make it an ideal choice for protecting against transients and power line disturbances. Additionally, its low leakage current helps to reduce power losses and ensure reliable protection in any circuit.

The specific data is subject to PDF, and the above content is for reference