B72241L0171K100

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS ( Transient Voltage Suppressors ), MOVs ( Metal Oxide Varistors ) and B72241L0171K100 are components used in the transient voltage surge suppression. They are used to protect low voltage circuits from transients caused by inductive loads and capacitance discharge. The B72241L0171K100 is a Uni-Directional TVS that is suitable for applications in a wide range of voltage levels. The device is capable of voltages as low as 4V and up to 30V, with peak and surge current currents of 72A and 310A respectively.

The B72241L0171K100 application field is diverse but typically it is used in industrial or commercial environments to protect low voltage circuits. This includes wiring, communications and datacom equipment and controls, which are subject to high transient voltages. The B72241L0171K100 is also used in surge protection equipment such as solar charge controllers, inverters, and wind turbines. These devices need to be able to withstand extreme electrical transients and are usually located in remote locations where additional protection is essential.

The B72241L0171K100 is an ideal component for use in a power factor correction ( PFC ) circuit. It helps maintain a constant voltage level in the PFC circuit, and is also utilized when AC power is rectified to DC. The device also plays a critical role in minimizing radio frequency interference ( RFI ) in sensitive circuits.

The working principle of the B72241L0171K100 is that of a unidirectional TVS. Unidirectional TVSs are typically connected in a series configuration. When a positive voltage waveform is applied across the series connections, the device triggers into a conducting state. Once turned on, the device conducts current in the reverse direction to prevent further voltage from entering the circuit. It is the combination of its low voltage and high peak current ratings that make it so effective. The TVS is also characterized by its initial breakdown voltage, its clamping voltage, and its leakage current.

The device is also rated for an Stand-off Voltage ( VRWM ) which is the maximum peak voltage it will be expected to see during normal working conditions. Knowing this rating is essential when selecting the device for a given application. It also provides insight into the device\'s performance characteristics.

In addition to its basic surge protection capabilities, the device can also be used in combination with other components, such as metal oxide varistors ( MOVs ), to provide additional protection. MOVs are used in series with TVSs to form a complete protection circuit.

The B72241L0171K100 is an ideal component for a wide range of transient voltage surge protection applications. Its low voltage rating and high peak current capabilities make it a versatile component for protecting sensitive circuits and equipment. When used in combination with other components such as MOVs, a complete protection solution can be developed for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference